GL-100 - Square Proximity Sensor - Panasonic Proximity Sensor - INOSAKI Automation Components Wholesales

GL-100 – Square Proximity Sensor – Panasonic Proximity Sensor

$ 14.03 – $ 25.53

SKU: N/A

Model

Description
Additional information

class		Detection distance (Note 1)	Model	output	Output actions
standard		Maximum working distance: 5mm±10% stable detection range:0~4mm	GL-118H	NPN output transistor	Approaching ON
standard			GL-118HB		ON when leaving
Long-range type		Maximum working distance: 12mm±10% stable detection range:0~10mm	GL-118HL		Approaching ON
Long-range type	Heterogeneous		GL-118HLI		Approaching ON

(Note 1):	The maximum working distance is the maximum distance at which the sensor can detect an object detected by the standard. The stable detection range is the detection distance at which the sensor stabilizes the detected object of the standard (even in the case of ambient temperature changes and/or fluctuations in the supply voltage).

Specification

type		standard		Long distance	Long distance
type		standard		Long distance	Heterogeneous
Model		GL-118H	GL-118HB	GL-118HL	GL-118HLI
Installation method		Unmasked
Maximum working distance ^{(Note 2).}		5mm±10%		12mm±10%
Stabilize the detection range ^{(Note 2).}		0mm~4mm		0mm~10mm
Standard detection objects		Iron plate 18mm× 18mm×t1mm		Iron plate 36mm×36mm×t1mm
Should be poor		Less than 15% of working distance (standard detection object)
Supply voltage		10V~30V DC pulsation P-P-P10% or less
Consumes current		10mA or less
Output status		Approaching ON	ON when leaving	Approaching ON
output		• Extended voltage: 30V DC or less • Load current: 100mA or less • Residual voltage: 1.5V or less (at 100mA load current)
Short-circuit protection		Equipped (auto-recovery)
Working status indicator		Orange LED (on when output ON)
Frequency of reaction		1kHz		500Hz
Environmental performance	Protection Construct	IP67G ^{(Note 3).}
	Use ambient temperature	-25 °C ~ +70 °C (no condensation or frost), storage: -25 °C ~ +70 °C
	Use ambient humidity	35%RH~85%RH or less, storage: 35%RH~85%RH
	Withstand voltage	Connect an AC voltage of 1000V between all connected power terminals and the housing for 1 minute
	Insulation resistance	Between all power connection terminals and housing, above 500MΩ, based on a DC500V high-impedance meter
	Vibration resistant	In the X, Y and Z directions, it can withstand the vibration of 10Hz~50Hz and double amplitude of 1.5mm for up to 2 hours
	Impact resistant	In the X, Y and Z directions, it can withstand three impacts with an acceleration of 500m/s² (about 50G).
Material		Housing: ABS+PBT
cable		3-core oil-resistant rubber cable with a cross-sectional area of 0.2mm2, 1m long
Cable extension		The total length of cables with a cross-sectional area of 0.2mm2 or more can be extended to 100m
weight		Approx. 65g

(Note 1) The measurement condition is ambient temperature = +23°C if not specified.
(Note 2) The maximum working distance is the maximum distance at which the sensor can detect a standard detection object.
The stable detection range is the detection distance at which the sensor stabilizes the detected object of the standard (even in the case of ambient temperature changes and/or fluctuations in the supply voltage).
(Note 3) If used in an environment where cutting oil is splashed, the product may age due to additives contained in the oil, so please check the resistance of the cutting oil used in advance.