DCA2 / DCN3 / XS4 – DeviceNet Peripheral Devices – Omron DeviceNet

$ 82.06

SKU: N/A

General-purpose Models

Product Appearance Model Specifications
T-branch Tap for
1 branch line
783_lu_1_1
 DCN1-1NC Cable wiring direction: Toward top
Cable lock direction: From top
Connector screw direction: From top		 Provided with 3 parallel
connectors with clamps
(XW4G-05C1-H1-D),
standard terminating resistor
783_lu_1_2
 DCN1-1C Cable wiring direction: Toward side
Cable screw direction: From top
Connector screw direction: From side		 Provided with 3 parallel
connectors with screws
(XW4B-05C1-H1-D),
standard terminating resistor
783_lu_1_3
 DCN1-2C Cable wiring direction: Toward top
Cable screw direction: From side
Connector screw direction: From top
783_lu_1_4
 DCN1-2R Cable wiring direction: Toward side
Cable screw direction: From top
Connector screw direction: From top		 Provided with 3 orthogonal
connectors with screws
(XW4B-05C1-V1R-D),
standard terminating resistor
T-branch Tap for
3 branch lines
783_lu_1_5
 DCN1-3NC Cable wiring direction: Toward top
Cable lock direction: From top
Connector screw direction: From top		 Provided with 5 parallel
clamp connectors with screws
(XW4G-05C1-H1-D),
standard terminating resistor
783_lu_1_6
 DCN1-3C Cable wiring direction: Toward side
Cable screw direction: From top
Connector screw direction: From side		 Provided with 5 parallel
connectors with screws
(XW4B-05C1-H1-D),
standard terminating resistor
783_lu_1_7
 DCN1-4C Cable wiring direction: Toward top
Cable screw direction: From side
Connector screw direction: From top
783_lu_1_8
 DCN1-4R Cable wiring direction: Toward side
Cable screw direction: From top
Connector screw direction: From top		 Provided with 5 orthogonal
clamp connectors with screws
(XW4B-05C1-V1R-D),
standard terminating resistor
Power Supply Tap
783_lu_1_9
 DCN1-1P Tap provided with 2 connectors, standard terminating resistor, and fuse
Connectors
783_lu_1_10
 XW4G-05C1-H1-D Parallel clamp connector with screws
Connector insertion and wiring both performed horizontally.
783_lu_1_11
 XW4G-05C4-TF-D Parallel multi-branching clamp connector with screws
Connector insertion and wiring performed in same direction.
783_lu_1_12
 XW4B-05C1-H1-D Parallel connector with screws
Connector insertion and wiring performed in same direction.
783_lu_1_13
 XW4B-05C4-T-D Parallel, screw-less, multi-branching connector
Connector insertion and wiring performed in same direction.
783_lu_1_14
 XW4B-05C4-TF-D Parallel, multi-branching connector with screws
Connector insertion and wiring performed in same direction.
783_lu_1_15
 XW4B-05C1-V1R-D Orthogonal connector with screws
Connector insertion and wiring performed at a right angle.
DeviceNet
Standard
Cables		 Thin
Cables
783_lu_1_16
 DCA1-5C10(-B) Outer diameter: 7.00 mm
Length: 100 m
DCA1-5C10-B: Cable color: Blue
DCA1-5C10: Cable color: Gray
Thick
Cables
783_lu_1_17
 DCA2-5C10(-B) Outer diameter: 11.6 mm
Length: 100 m
DCA2-5C10-B: Cable color: Blue
DCA2-5C10: Cable color: Gray
Terminal-block
Terminator
783_lu_1_18
 DRS1-T Resistance of 121 Ω

 

General-purpose Models (T-branch Taps)

Rated current Between main lines: 8 A (power supply line) and 2 A (signal line)
Between main and branch lines: 3 A (power supply line) and 1 A (signal line)
Insulation resistance 100 M Ω min. (at 500 VDC)
Dielectric strength 500 VAC for 1 min, leakage current: 1 mA max.
Ambient operating temperature 0°C to 55°C

 

Peripheral Devices for Environment-resistive Slaves

Peripheral Devices for DeviceNet Communications

Environment-resistive Connection Products (for Thin Cable, M12 Micro Connectors)

Type Connectors with
Cables
DCA1-5CN[][][]1		 T-branch Connector
DCN2-1		 Assembling-type
Connector
XS2[]-D5S7		 Connectors with
Terminating Resistor
DRS2-[]
Rated current 3 A
Rated voltage 125 VDC
Contact resistance
(connector)		 40 mΩ max. (at 20 mVDC max. and 100 mA max.)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength
(connector)		 1,500 VAC for 60 seconds (leakage current: 1 mA max.)
Ambient operating
temperature		 -20°C to 65°C *
Storage temperature
range		 -25°C to 70°C
Degree of protection IEC IP67
Insertion durability 200 times
Cable strength 98 N for 15 s —
Vibration resistance No current interruptions of more than 1 μs while performing simple vibrations at either 10 to
500 Hz with 1.52-mm full amplitude or at acceleration 100 m/s2, whichever is smaller
* Use the robot cable within a temperature range between 0°C and 65°C to prevent the wires inside the cable from being broken when bending it.

Environment-resistive Models (for Thin Wires and M12 Micro Connectors)

Type Connectors with
Cables
DCA1-5CS[][][]1		 T-branch Connector
DCN2-1S		 Connectors with
Terminating Resistor
DRS2-[]S		 Branch Relay Box
DCN2-S[]C5H
Rated current 3 A
Rated voltage 125 VDC
Contact resistance
(connector)		 40 mΩ max. (at 20 mVDC max. and 100 mA max.)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
Dielectric strength
(connector)		 1,500 VAC for 60 seconds (leakage current: 1 mA max.) 1,000 VAC for 60
seconds
Ambient operating
temperature		 -20°C to 65°C *
Storage temperature
range		 -25°C to 70°C
Degree of protection IEC IP67
Insertion durability 200 times
Cable strength 98 N for 15 s —
Vibration resistance No current interruptions of more than 1 μs while performing simple vibrations at either 10 to
500 Hz with 1.52-mm full amplitude or at acceleration 100 m/s2, whichever is smaller
Lock strength Pulling: 100 N/15 s, Rotating: 1 N·m/15 s
Lock force 0.1 to 0.25 N·m
* Use the robot cable within a temperature range between 0°C and 65°C to prevent the wires inside the cable from being broken when bending it.

Environment-resistive Models for Thick Wires with 7/8-16UN Mini Connectors

Type Connectors
with Thick
Cables
DCA2-
5CN[][][]1		 Connectors
with Thin
Cables
DCA1-
5CN[][]W5		 T-branch
Connector
DCN3-11		 T-branch
Connector
DCN3-12		 Connectors
with
Terminating
Resistor
DRS3-1		 Panel
Mounting
Connector
DCA2-
5CNC5P1		 Panel
Mounting
Connector
XS4M-
D521-1
Rated current 8 A 3 A 8 A 3 A *1 8 A
Rated voltage 125 VDC
Contact
resistance
(connector)		 30 mΩ max. (at 20 mVDC max. and 100 mA max.)
Insulation
resistance		 1,000 MΩ min. (at 500 VDC)
Dielectric
strength
(connector)		 1,500 VAC for 60 seconds (leakage current: 1 mA max.)
Ambient
operating
temperature		 -20°C to 65°C *2
Storage
temperature
range		 -25°C to 70°C
Degree of
protection		 IEC IP67
Insertion
durability		 200 times
Cable strength 98 N for 15 s — 98 N for 15 s —
Vibration
resistance		 No current interruptions of more than 1 μs while performing simple vibrations at either 10 to 500 Hz
with 1.52-mm full amplitude or at acceleration 100 m/s2, whichever is smaller
*1. The rated current between thick wires is 8 A.
*2. Use the robot cable within a temperature range between 0 °C and 65 °C to prevent the wires inside the cable from being broken when bending it.

Related products