SIMATIC S7-1500 - PM 1507 - Siemens Power Supply - INOSAKI Automation Components Wholesales

SIMATIC S7-1500 – PM 1507 – Siemens Power Supply

$ 198.29 – $ 275.16

SKU: N/A

Model

Description
Additional information

The design and functionality of the SIMATIC PM 1507 single-phase load power supply (PM = power module) with automatic range selection of the input voltage makes it an optimal match to the SIMATIC S7-1500 PLC. It supplies the S7-1500 system components such as CPU, system power supply (PS), I/O circuits of the input and output modules and, if necessary, the sensors and actuators with 24 V DC.

Siemens Power Supplies PM 1507 Product Specifications:

Article number	6EP1332-4BA00	6EP1333-4BA00
Product	S7-1500 PM1507	S7-1500 PM1507
Power supply, type	24 V/3 A	24 V/8 A
Input
type of the power supply network	1-phase AC	1-phase AC
supply voltage at AC
● initial value	Automatic range selection	Automatic range selection
supply voltage
● 1 at AC rated value	120 V	120 V
● 2 at AC rated value	230 V	230 V
input voltage
● 1 at AC	85 … 132 V	85 … 132 V
● 2 at AC	170 … 264 V	170 … 264 V
design of input wide range input	No	No
overvoltage overload capability	2.3 × Vin rated, 1.3 ms	2.3 × Vin rated, 1.3 ms
operating condition of the mains buffering	at Vin = 93/187 V	at Vin = 93/187 V
buffering time for rated value of the output current in the event of power failure minimum	20 ms	20 ms
operating condition of the mains buffering	at Vin = 93/187 V	at Vin = 93/187 V
line frequency
● 1 rated value	50 Hz	50 Hz
● 2 rated value	60 Hz	60 Hz
line frequency	45 … 65 Hz	45 … 65 Hz
input current
● at rated input voltage 120 V	1.4 A	3.7 A
● at rated input voltage 230 V	0.8 A	1.7 A
current limitation of inrush current at 25 °C maximum	23 A	62 A
duration of inrush current limiting at 25 °C
● maximum	3 ms	3 ms
I2t value maximum	1.3 A²·s	12 A²·s
fuse protection type	T 3,15 A/250 V (not accessible)	T 6.3 A/250 V (not accessible)
● in the feeder	Recommended miniature circuit breaker: 10 A characteristic B or 6 A characteristic C	Recommended miniature circuit breaker: 16 A characteristic B or 10 A characteristic C
Output
voltage curve at output	Controlled, isolated DC voltage	Controlled, isolated DC voltage
output voltage at DC rated value	24 V	24 V
output voltage
● at output 1 at DC rated value	24 V	24 V
relative overall tolerance of the voltage	1 %	1 %
relative control precision of the output voltage
● on slow fluctuation of input voltage	0.1 %	0.1 %
● on slow fluctuation of ohm loading	0.1 %	0.1 %
residual ripple
● maximum	50 mV	50 mV
voltage peak
● maximum	150 mV	150 mV
product function output voltage adjustable	No	No
display version for normal operation	LED green for 24 V OK; LED red for error; LED yellow for stand-by	LED green for 24 V OK; LED red for error; LED yellow for stand-by
behavior of the output voltage when switching on	No overshoot of Vout (soft start)	No overshoot of Vout (soft start)
response delay maximum	1.5 s	1.5 s
voltage increase time of the output voltage
● typical	10 ms	10 ms
output current
● rated value	3 A	8 A
● rated range	0 … 3 A	0 … 8 A
supplied active power typical	72 W	192 W
short-term overload current
● on short-circuiting during the start-up typical	12 A	35 A
● at short-circuit during operation typical	12 A	35 A
duration of overloading capability for excess current
● on short-circuiting during the start-up	70 ms	70 ms
● at short-circuit during operation	70 ms	70 ms
product feature
● bridging of equipment	Yes	Yes
number of parallel-switched equipment resources for increasing the power	2	2
Efficiency
efficiency in percent	87 %	90 %
power loss [W]
● at rated output voltage for rated value of the output current typical	11 W	21 W
Closed-loop control
relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical	0.1 %	0.1 %
relative control precision of the output voltage load step of resistive load 50/100/50 % typical	1 %	2 %
relative control precision of the output voltage at load step of resistive load 10/90/10 % typical	3 %	3 %
setting time
● load step 10 to 90% typical	5 ms	5 ms
● load step 90 to 10% typical	5 ms	5 ms
● maximum	5 ms	5 ms
Protection and monitoring
design of the overvoltage protection	Additional control loop, limitation (closed loop control) at < 28.8 V	Additional control loop, limitation (closed loop control) at < 28.8 V
response value current limitation	3.15 … 3.6 A	8.4 … 9.6 A
response value current limitation typical	3.4 A	9 A
property of the output short-circuit proof	Yes	Yes
design of short-circuit protection	Electronic shutdown, automatic restart	Electronic shutdown, automatic restart
display version for overload and short circuit	–	–
Safety
galvanic isolation between input and output	Yes	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2
operating resource protection class	Class I	Class I
leakage current
● maximum	3.5 mA	3.5 mA
● typical	0.4 mA	1.3 mA
protection class IP	IP20	IP20
Approvals
certificate of suitability
● CE marking	Yes	Yes
● UL approval	Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289	Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
● CSA approval	Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289	Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
● cCSAus, Class 1, Division 2	No	No
● ATEX	Yes; ATEX (EX) II 3G Ex nA nC IIC T4 Gc	Yes; ATEX (EX) II 3G Ex nA nC IIC T3 Gc
certificate of suitability
● relating to ATEX	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455	IECEx Ex nA nC IIC T3 Gc; ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T3, File E330455
● IECEx	Yes; IECEx Ex nA nC IIC T4 Gc	Yes; IECEx Ex nA nC IIC T3 Gc
● NEC Class 2	No	No
● ULhazloc approval	Yes	Yes
● FM registration	Yes; Class I, Div. 2, Group ABCD, T4	Yes; Class I, Div. 2, Group ABCD, T4
type of certification CB-certificate	Yes	Yes
certificate of suitability
● EAC approval	Yes	Yes
certificate of suitability shipbuilding approval	Yes	Yes
shipbuilding approval	ABS, BV, DNV GL	ABS, BV, DNV GL
Marine classification association
● American Bureau of Shipping Europe Ltd. (ABS)	Yes	Yes
● French marine classification society (BV)	Yes	Yes
● DNV GL	Yes	Yes
● Lloyds Register of Shipping (LRS)	No	No
● Nippon Kaiji Kyokai (NK)	No	No
EMC
standard
● for emitted interference	EN 55022 Class B	EN 55022 Class B
● for mains harmonics limitation	EN 61000-3-2	EN 61000-3-2
● for interference immunity	EN 61000-6-2	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	0 … 60 °C; with natural convection	0 … 60 °C; with natural convection
● during transport	-40 … +85 °C	-40 … +85 °C
● during storage	-40 … +85 °C	-40 … +85 °C
environmental category according to IEC 60721	Climate class 3K3, 5 … 95% no condensation	Climate class 3K3, 5 … 95% no condensation
Mechanics
type of electrical connection	Screw-/spring clamp connection	Screw-/spring clamp connection
● at input	L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm²	L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm²
● at output	L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm²	L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm²
product function
● removable terminal at input	Yes	Yes
● removable terminal at output	Yes	Yes
width of the enclosure	50 mm	75 mm
height of the enclosure	147 mm	147 mm
depth of the enclosure	129 mm	129 mm
required spacing
● top	40 mm	40 mm
● bottom	40 mm	40 mm
● left	0 mm	0 mm
● right	0 mm	0 mm
net weight	0.45 kg	0.74 kg
product feature of the enclosure housing can be lined up	Yes	Yes
fastening method	Can be mounted onto S7-1500 rail	Can be mounted onto S7-1500 rail
MTBF at 40 °C	1 611 993 h	1 362 918 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)