$ 302.42
| Article number | 6ES7151-1BA02-0AB0 |
| ET200S, Interf.Mod. IM151-1 HF, 12MBit/s | |
| General information | |
| Product type designation | IM 151-1 HF |
| Product function | |
| ● Isochronous mode | Yes |
| Supply voltage | |
| Mains buffering | |
| ● Mains/voltage failure stored energy time | 20 ms |
| Input current | |
| from supply voltage 1L+, max. | 200 mA |
| Power loss | |
| Power loss, typ. | 3.3 W |
| Address area | |
| Addressing volume | |
| ● Inputs | 244 byte |
| ● Outputs | 244 byte |
| Interfaces | |
| Transmission procedure | RS 485 |
| Transmission rate, max. | 12 Mbit/s |
| Protocols | |
| Supports protocol for PROFINET IO | No |
| PROFIBUS DP | Yes |
| PROFIBUS DP | |
| Services | |
| — SYNC capability | Yes |
| — FREEZE capability | Yes |
| — Direct data exchange (slave-to-slave communication) | Yes |
| Interrupts/diagnostics/status information | |
| Alarms | Yes |
| Diagnostics function | Yes |
| Diagnostics indication LED | |
| ● Bus fault BF (red) | Yes |
| ● Group error SF (red) | Yes |
| ● Monitoring 24 V voltage supply ON (green) | Yes |
| Potential separation | |
| between backplane bus and electronics | No |
| between electronic block and PROFIBUS DP | Yes |
| between supply voltage and electronics | No |
| Isolation | |
| Isolation tested with | 500 V DC |
| Standards, approvals, certificates | |
| CE mark | Yes |
| UL approval | Yes |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● min. | 0 °C |
| ● max. | 60 °C |
| Dimensions | |
| Width | 45 mm |
| Height | 119.5 mm |
| Depth | 75 mm |
| Weights | |
| Weight, approx. | 150 g |
