SIMATIC S7-400 – FM 453 Positioning Module – Siemens Function Modules
$ 2,169.15
SKU: 6ES7453-3AH00-0AE0
The FM 453 is an intelligent, three-channel module designed for a wide range of positioning tasks using servo and/or stepper motors. It can be used for simple point-to-point positioning tasks as well as for complex traverse profiles with the most stringent demands for dynamic response, accuracy, and velocity.
Siemens Function Modules SIMATIC S7-400 Product Specifications:
Article number | 6ES7453-3AH00-0AE0 |
SIMATIC S7-400, FM 453 | |
Supply voltage | |
Auxiliary voltage 1L+, load voltage 2L+ | |
● Rated value (DC) | 24 V |
● permissible range, lower limit (DC) | 20.4 V; Dynamic 18.5 V |
● permissible range, upper limit (DC) | 28.8 V; dynamic 30.2 V |
Input current | |
from load voltage1L+, max. | 1 A; with 24 V position encoder; 1 A for 5 V position encoder |
from load voltage 2L+ to 4L+, max. | 2 A; Per channel |
from backplane bus 5 V DC, max. | 1.6 A; Rated current |
Encoder supply | |
5 V encoder supply | |
● 5 V | Yes |
● Output current, max. | 300 mA |
● Cable length, max. | 35 m; at max. 210 mA; 25 m at max. 300 mA |
24 V encoder supply | |
● 24 V | Yes |
● Cable length, max. | 100 m; at max. 300 mA |
Power loss | |
Power loss, typ. | 8 W |
Digital inputs | |
Number of digital inputs | 6; for each channel/axis |
Functions | configurable |
Input voltage | |
● Rated value (DC) | 24 V |
● for signal “0” | -3 to +5 V (max. 3 mA) |
● for signal “1” | 11 to 30 V (max. 7 mA) |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— at “0” to “1”, max. | 15 µs; via input voltage range, 8 µs at 24 V DC |
— at “1” to “0”, max. | 45 µs; via input voltage range |
Digital outputs | |
Number of digital outputs | 4; for each channel/axis |
Functions | configurable |
Short-circuit protection | Yes |
Output voltage | |
● Rated value (DC) | 24 V |
● for signal “1”, min. | UP – 0,3 V |
Output current | |
● for signal “1” rated value | 0.5 A; at 40 °C; 0.1 A at 60 °C |
● for signal “1” permissible range for 0 to 40 °C, min. | 5 mA |
● for signal “1” permissible range for 0 to 40 °C, max. | 0.6 A |
● for signal “1” permissible range for 40 to 60 °C, min. | 5 mA |
● for signal “1” permissible range for 40 to 60 °C, max. | 0.12 A |
● for signal “0” residual current, max. | 2 mA |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 0.25 Hz |
Encoder | |
Connectable encoders | |
● Incremental encoder (symmetrical) | Yes |
● Absolute encoder (SSI) | Yes |
Encoder signals, incremental encoder (symmetrical) | |
● Input voltage | 5 V difference signal (phys. RS 422) |
● Input frequency, max. | 1 MHz; for 10 m cable length; 0.5 MHz for 35 m cable length |
Encoder signals, absolute encoder (SSI) | |
● Input signal | 5 V difference signal (phys. RS 422) |
● Clock frequency, max. | 1.25 Mbit/s at 10 cable length (2.5 Mbit/s available soon) |
● Cable length, shielded, max. | 250 m; At max. 156 kbit/s |
Drive interface | |
Signal Input | |
● Type | Drive interface step, signal input “READY 1” |
● Function | “Power section ready” where Ui < 1 V, Ii = 2 mA |
Analog drive | |
Setpoint signal | |
— Rated voltage range | -10 to +10V |
— Output current | -3 to +3 mA |
— Cable length, max. | 30 m |
Output controller enable | |
— Switching voltage, max. | 50 V |
— Switching current, max. | 1 A |
— Switching capacity, max. | 30 VA |
Stepper drive | |
● Differential output voltage, min. | 2 V; RL = 100 Ohm |
● Differential output voltage for signal “0”, max. | 1.1 V; Io = 30 mA |
● Differential output voltage for signal “1”, min. | 3.7 V; Io = -30 mA |
● Load resistance, min. | 55 Ω |
● Output current, max. | 60 mA |
● Pulse frequency | 200 kHz; 500 kHz available soon |
● Cable length, shielded, max. | 35 m; 35 m with symm. transmission; 10 m with asymm. transmission |
Potential separation | |
Potential separation digital inputs | |
● Potential separation digital inputs | Yes; Optocoupler |
Potential separation digital outputs | |
● Potential separation digital outputs | Yes; Optocoupler |
Ambient conditions | |
Ambient temperature during operation | |
● min. | 0 °C |
● max. | 55 °C |
Ambient temperature during storage/transportation | |
● min. | -40 °C |
● max. | 70 °C |
connection method / header | |
required front connector | 1x 48-pin |
Dimensions | |
Width | 50 mm |
Height | 290 mm |
Depth | 210 mm |
Weights | |
Weight, approx. | 1 620 g |
Weight | 1.81 kg |
---|---|
Dimensions | 23.3 × 29.6 × 6.6 cm |
Related products
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details