ET 200SP BusAdapter “BA-Send”
BA-Send BusAdapters are used whenever an existing ET 200SP station is to be expanded with IP67 modules of the SIMATIC ET 200AL.
The SIMATIC ET 200AL is a distributed I/O device with degree of protection IP65/67 that is easy to operate and install. Due to its high degree of protection and ruggedness as well as its small dimensions and low weight, the ET 200AL is especially suitable for use at the machine and on moving plant sections. SIMATIC ET 200AL enables the user to access digital and analog signals and IO-Link data at low cost.
Siemens BusAdapter ET 200SP Product Specifications:
| Article number |
6ES7193-6AS00-0AA0 |
|
ET 200SP, Busadapter BA-Send BA1XFC |
| General information |
|
| Product type designation |
BA-Send 1xFC |
| HW functional status |
From FS05 |
| Interfaces |
|
| Supports protocol for PROFINET IO |
|
| Cable length |
|
| — Cu conductors |
15 m; from IM firmware V3.3: between BA-send and the first ET-CONNECTION bus node and between all other bus nodes |
| ET-Connection |
|
| ● Number of interfaces ET connection |
1 |
| ● FC (FastConnect) |
Yes |
| Ambient conditions |
|
| Ambient temperature during operation |
|
| ● horizontal installation, min. |
-30 °C |
| ● horizontal installation, max. |
60 °C |
| ● vertical installation, min. |
-30 °C |
| ● vertical installation, max. |
50 °C |
| Altitude during operation relating to sea level |
|
| ● Installation altitude above sea level, max. |
5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual |
| Dimensions |
|
| Width |
20 mm |
| Weights |
|
| Weight, approx. |
44 g |
