SIMATIC ET 200SP – CM 4 x IO-Link ST - Communication Modules – Siemens

SIMATIC ET 200SP – CM 4 x IO-Link ST – Communication Modules – Siemens

$ 284.02

SKU: N/A

Model

Description
Additional information

The CM 4x IO-Link communications module enables data exchange with up to 4 external IO-Link devices via one 3-wire cable each. Comprehensive parameterization options make it possible to adapt the controller flexibly to the communication partner. Thanks to the compatibility of IO-Link with standard sensors, commercially available sensors in accordance with IEC 61131 Type 1 can also be operated on the IO-Link master.

Siemens Modules ET-200SP Product Specifications:

Article number	6ES7137-6BD00-0BA0
	ET 200SP, cm 4 X IO-Link ST
General information
Product type designation	CM 4 x IO-Link ST
HW functional status	FS20
Firmware version	V2.2.2
● FW update possible	Yes
usable BaseUnits	BU type A0
Color code for module-specific color identification plate	CC04
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	No; Only for PROFINET and configuration as version with FW V2.0 or V2.1
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	STEP 7 V15 or higher
● STEP 7 configurable/integrated from version	STEP 7 V5.5 or higher
● PROFIBUS from GSD version/GSD revision	One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision	GSDML V2.3
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V; 20.5 V if IO-Link is used, as the supply voltage for IO-Link devices has to be at least 20 V at the master.
permissible range, upper limit (DC)	28.8 V
power supply according to NEC Class 2 required	No
Input current
Current consumption, max.	45 mA; without load
Encoder supply
Number of outputs	4
Output current
● Rated value	700 mA; Per channel
24 V encoder supply
● Short-circuit protection	Yes
● Output current, max.	2.1 A
Power loss
Power loss, typ.	1 W
Hardware configuration
Automatic encoding	Yes
● Electronic coding element type H	Yes
Digital outputs
Cable length
● unshielded, max.	20 m; Also applies for shielded cables
IO-Link
Number of ports	4
● of which simultaneously controllable	4
IO-Link protocol 1.0	Yes
IO-Link protocol 1.1	Yes
Transmission rate	4.8 kBaud (COM1); 38.4 kBaud (COM2), 230.4 kBaud (COM3)
Cycle time, min.	2 ms; dynamic, depending on user data length
Size of process data, input per port	32 byte; max.
Size of process data, input per module	144 byte; max.
Size of process data, output per port	32 byte; max.
Size of process data, output per module	128 byte; max.
Memory size for device parameter	2 kbyte; for each port
Master backup	Yes
Configuration without S7-PCT	Yes
Cable length unshielded, max.	20 m
Operating modes
● IO-Link	Yes
● DI	Yes
● DQ	Yes; max. 100 mA per channel
Time Based IO
— TIO IO-Link IN	No; Only for PROFINET and configuration as version with FW V2.0 or V2.1
— TIO IO-Link OUT	No; Only for PROFINET and configuration as version with FW V2.0 or V2.1
— TIO IO-Link IN/OUT	No; Only for PROFINET and configuration as version with FW V2.0 or V2.1
Connection of IO-Link devices
● Port type A	Yes
● Port type B	Yes; 24 V DC via external terminal
● via three-wire connection	Yes
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm	Yes; The port diagnosis is available in the IO-Link mode only.
Diagnoses
● Monitoring the supply voltage	Yes
● Wire-break	Yes
● Short-circuit	Yes
● Group error	Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
● Channel status display	Yes; one green LED for channel status Qn (SIO mode) and port status Cn (IO-Link mode) per channel
● for channel diagnostics	Yes; red Fn LED
● for module diagnostics	Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels	No
● between the channels and backplane bus	Yes
● between the channels and the power supply of the electronics	No
Isolation
Isolation tested with	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	-30 °C
● horizontal installation, max.	60 °C
● vertical installation, min.	-30 °C
● vertical installation, max.	50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	2 000 m; On request: Installation altitudes greater than 2 000 m
Dimensions
Width	13 mm
Height	73 mm
Depth	58 mm
Weights
Weight, approx.	30 g