Phoenix Contact develops terminal blocks, distribution blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.
Product description
Distribution block, the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories, Block with horizontal alignment and integrated supply, nom. voltage: 690 V, nominal current: 24 A, connection method: Push-in connection, Load contact, cross section: 0.14 mm² – 4 mm², Push-in connection, Line contact, Rated cross section: 6 mm², cross section: 0.5 mm² – 10 mm², mounting type: NS 35/7,5, NS 35/15, color: blue
General
| Note |
Notes on operation the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories |
| Part Number |
3273200 |
| Number of rows |
1 |
| Number of connections |
7 |
| Potentials |
1 |
| Nominal cross section |
2.5 mm² |
| Color |
blue |
| Insulating material |
PA |
| Flammability rating according to UL 94 |
V0 |
| Mounting type |
NS 35/7,5 |
| Rated surge voltage |
8 kV |
| Degree of pollution |
3 |
| Overvoltage category |
III |
| Insulating material group |
I |
| Maximum power dissipation for nominal condition |
0.77 W |
| Maximum load current |
32 A (with 4 mm² conductor cross section) |
| Maximum total current |
57 A (with 10 mm² conductor cross section) |
| Nominal current IN |
24 A |
| Nominal voltage UN |
690 V |
| Maximum load current |
57 A (with 10 mm² conductor cross section) |
| Nominal current IN |
41 A (with 6 mm² conductor cross section) |
| Open side panel |
No |
| General information |
The maximum load current of a single clamping unit must not be exceeded. For power distribution applications, IEC 60364-4-43.2008; modified + corrigendum Okt. 2008 (DIN VDE 0100-430:2010-10) section 433.2 ff must be observed! |
| Shock protection test specification |
DIN EN 50274 (VDE 0660-514):2002-11 |
| Back of the hand protection |
guaranteed |
| Finger protection |
guaranteed |
| Result of surge voltage test |
Test passed |
| Result of power-frequency withstand voltage test |
Test passed |
| Power frequency withstand voltage setpoint |
1.89 kV |
| Result of the test for mechanical stability of terminal points (5 x conductor connection) |
Test passed |
| Result of flexion and pull-out test |
Test passed |
| Bending test rotation speed |
10 rpm |
| Bending test turns |
135 |
| Bending test conductor cross section/weight |
0.5 mm² / 0.3 kg |
|
6 mm² / 1.4 kg |
|
10 mm² / 2 kg |
|
0.14 mm² / 0.2 kg |
|
2.5 mm² / 0.7 kg |
|
4 mm² / 0.9 kg |
| Tensile test result |
Test passed |
| Conductor cross section tensile test |
0.5 mm² |
| Tractive force setpoint |
20 N |
| Conductor cross section tensile test |
6 mm² |
| Tractive force setpoint |
80 N |
| Conductor cross section tensile test |
10 mm² |
| Tractive force setpoint |
90 N |
| Conductor cross section tensile test |
0.14 mm² |
| Tractive force setpoint |
10 N |
| Result of tight fit on support |
Test passed |
| Tight fit on carrier |
NS 35 |
| Setpoint |
5 N |
| Note |
When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks. |
|
For versions with 6 or 7 connections, it is enough to place one DIN rail adapter centrally per block and place flange elements after every other block. |
|
When using the DIN rail adapter PTFIX-NS35, an aligned block must not protrude by more than a half. |
| Result of voltage-drop test |
Test passed |
| Requirements, voltage drop |
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1 |
| Result of temperature-rise test |
Test passed |
| Requirement temperature-rise test |
Increase in temperature ≤ 45 K |
| Short circuit stability result |
Test passed |
| Conductor cross section short circuit testing |
6 mm² |
| Short-time current |
0.72 kA |
| Conductor cross section short circuit testing |
10 mm² |
| Short-time current |
1.2 kA |
| Result of thermal test |
Test passed |
| Proof of thermal characteristics (needle flame) effective duration |
30 s |
| Result of aging test |
Test passed |
| Ageing test for screwless modular terminal block temperature cycles |
192 |
| Oscillation, broadband noise test result |
Test passed |
| Test specification, oscillation, broadband noise |
DIN EN 50155 (VDE 0115-200):2008-03 |
| Test spectrum |
Service life test category 2, bogie-mounted |
| Test frequency |
f1 = 5 Hz to f2 = 250 Hz |
| ASD level |
6.12 (m/s²)²/Hz |
| Acceleration |
3.12g |
| Test duration per axis |
5 h |
| Test directions |
X-, Y- and Z-axis |
| Shock test result |
Test passed |
| Test specification, shock test |
DIN EN 50155 (VDE 0115-200):2008-03 |
| Shock form |
Half-sine |
| Acceleration |
30g |
| Shock duration |
18 ms |
| Number of shocks per direction |
3 |
| Test directions |
X-, Y- and Z-axis (pos. and neg.) |
| Relative insulation material temperature index (Elec., UL 746 B) |
130 °C |
| Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) |
130 °C |
| Static insulating material application in cold |
-60 °C |
| Surface flammability NFPA 130 (ASTM E 162) |
passed |
| Specific optical density of smoke NFPA 130 (ASTM E 662) |
passed |
| Calorimetric heat release NFPA 130 (ASTM E 1354) |
28 MJ/kg |
| Smoke gas toxicity NFPA 130 (SMP 800C) |
passed |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 |
HL 1 – HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 |
HL 1 – HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 |
HL 1 – HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R26 |
HL 1 – HL 3 |
Dimensions
| Width |
25.6 mm |
| Length |
45.7 mm |
| Height NS 35/7,5 |
30.9 mm |
Connection data
| Connection |
Load contact |
| Connection method |
Push-in connection |
| Stripping length |
8 mm … 10 mm |
| Connection in acc. with standard |
IEC 60947-7-1 |
| Conductor cross section solid min. |
0.14 mm² |
| Conductor cross section solid max. |
4 mm² |
| Conductor cross section AWG min. |
26 |
| Conductor cross section AWG max. |
12 |
| Conductor cross section flexible min. |
0.14 mm² |
| Conductor cross section flexible max. |
2.5 mm² |
| Min. AWG conductor cross section, flexible |
26 |
| Max. AWG conductor cross section, flexible |
14 |
| Conductor cross section flexible, with ferrule without plastic sleeve min. |
0.14 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve max. |
2.5 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve min. |
0.14 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve max. |
2.5 mm² |
| Connection cross sections directly pluggable |
0.34 mm² 4 mm² 24 12 |
| Conductor cross section solid min. |
0.34 mm² |
| Conductor cross section solid max. |
4 mm² |
| Conductor cross section AWG min. |
24 |
| Conductor cross section AWG max. |
12 |
| Conductor cross section flexible, with ferrule without plastic sleeve min. |
0.34 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve max. |
2.5 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve min. |
0.34 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve max. |
2.5 mm² |
| Internal cylindrical gage |
A3 |
| Connection |
Line contact |
| Connection method |
Push-in connection |
| Stripping length |
10 mm … 12 mm |
| Connection in acc. with standard |
IEC 60947-7-1 |
| Conductor cross section solid min. |
0.5 mm² |
| Conductor cross section solid max. |
10 mm² |
| Conductor cross section AWG min. |
20 |
| Conductor cross section AWG max. |
8 |
| Conductor cross section flexible min. |
0.5 mm² |
| Conductor cross section flexible max. |
10 mm² |
| Min. AWG conductor cross section, flexible |
20 |
| Max. AWG conductor cross section, flexible |
10 |
| Conductor cross section flexible, with ferrule without plastic sleeve min. |
0.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve max. |
6 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve min. |
0.5 mm² |
| Conductor cross section flexible, with ferrule with plastic sleeve max. |
6 mm² |
| Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum |
0.5 mm² |
| Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum |
1.5 mm² |
| Connection cross sections directly pluggable |
1 mm² 10 mm² |
| Conductor cross section solid min. |
1 mm² |
| Conductor cross section solid max. |
10 mm² |
| Value |
1 mm² |
|
6 mm² |
|
1 mm² |
|
6 mm² |
Ambient conditions
| Operating temperature |
-60 °C … 105 °C (max. short-term operating temperature RTI Elec.) |
| Ambient temperature (storage/transport) |
-25 °C … 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Permissible humidity (storage/transport) |
30 % … 70 % |
| Ambient temperature (assembly) |
-5 °C … 70 °C |
| Ambient temperature (actuation) |
-5 °C … 70 °C |
Standards and Regulations
| Connection in acc. with standard |
IEC 60947-7-1 |
|
IEC 60947-7-1 |
Environmental Product Compliance
| China RoHS |
Environmentally friendly use period: unlimited = EFUP-e |
|
No hazardous substances above threshold values |
Select options This product has multiple variants. The options may be chosen on the product page Details
Select options This product has multiple variants. The options may be chosen on the product page Details
Select options This product has multiple variants. The options may be chosen on the product page Details
Select options This product has multiple variants. The options may be chosen on the product page Details
Select options This product has multiple variants. The options may be chosen on the product page Details
Select options This product has multiple variants. The options may be chosen on the product page Details