UD18-22CC221 Ultrasonic sensors – SICK Sensor
$ 649.88
SICK sensor one of the world’s leading producers of sensors and sensor solutions for industrial applications. SICK is a technology and market leader in Factory and Logistics Automation as well as Process Automation. The sensor range are: Laser Sensors, Cylinder Sensors, Photoelectric Sensors, Fork Sensors, Encoders, Color Sensors, Distance Sensor, Contrast Sensor, Color Sensor, Inductive Proximity Sensors, Fiber Optic Sensor with our signature range sick sensor intelligence.
Part Number: 6058910
Distance Sensor Model: UD18-22CC221
OEM Spec Ref
Mechanics/electronics
| Supply voltage Vs | DC 20 V … 30 V 1) |
| Power consumption | ≤ 1.5 W 2) |
| Initialization time | < 300 ms |
| Design | Cylindrical |
| Housing material | Metal (Nickel-plated brass, PBT/PA)
Ultrasonic transducer: polyurethane foam, glass epoxy resin |
| Thread size | M18 x 1 |
| Connection type | Connection cable with open end: 7 x 0,25 mm², 2 m, PUR
Sender: connection cable to receiver with M8 male connector, 3-pin, 1 m, PUR Receiver: connection cable to sender with M8 female connector, 3-pin, 1.2 m, PUR |
| Indication | 2 x LED |
| Weight | 130 g |
| Sending axis | Straight |
| Dimensions (W x H x D) | 18 mm x 18 mm x 63.2 mm |
| Enclosure rating | IP65 |
| Protection class | III |
- 1) Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.
- 2) Without load.
Performance
| Installation distance | 20 mm … 60 mm, 40 mm ± 3 mm (default setting) |
| Target | Natural objects |
| Resolution | 1 material layer |
| Response time | 2.5 ms 1) |
| Switching frequency | 250 Hz |
| Output time | 2 ms, trigger mode: < 0.5 ms 1) |
| Ultrasonic frequency (typical) | 400 kHz |
| Additional function | 3 selectable sensitivity levels, teach-in of up to 4 individual sensitivity level, sensitivity level changeover during operation, set parameters via Connect+ Software 2) |
| Blind zone | 7 mm … 7 mm (from sender and receiver) |
| Permissible angle deviation | ± 45° perpendicular to material layer |
| Detectable material | Paper with grammages: 20 g/m² … 2,000 g/m²
Plastic sheets and foils: ≤ 0.4 mm Self-adhesive films, metal sheets: ≤ 0.3 mm Corrugated cardboard: single wall F, N and G flute sizes Washi Wafer PCB |
- 1) Set parameters via Connect+ Software.
- 2) Functions may vary depending on sensor type.
Interfaces
|
|||||||||||
| Control input | 3 x | ||||||||||
- 1) Outputs Q1 and Q2 short-circuit protected.
- 2) PNP: Active = Vs – (< 2 V) / Inactive = 0 V;
NPN: Active ≤ 2 V / Inactive = Vs.
Ambient data
| Ambient temperature, operation | +5 °C … +60 °C |
| Ambient temperature, storage | –40 °C … +85 °C |
