SICK 6050776 WLL180T-M634S11 Dual PNP Fiber-Optic Amplifier

USD 231.40

Base fiber amplifier with two individually adjustable PNP outputs, programmable delays, dual numeric display, M8 four-pin male connector and IP50.

SKU SICK-6050776 Category
SICK WLL180T

SICK WLL180T-M634S11 Dual PNP Fiber-Optic Amplifier

BrandSICK
Model IdentifierWLL180T-M634S11
Official Part Number6050776

Technical Overview

The SICK WLL180T-M634S11 is a base fiber-optic amplifier with two individually adjustable PNP outputs and support for up to 15 compatible expansion units. Its 650 nm red LED operates with a selected optical fiber, which determines the sensing arrangement and available range. Selectable response settings span 16–8,000 µs, and listed switching frequencies range from 31.2 kHz to 62.5 Hz. A two-by-four-digit display and operating buttons support threshold and parameter adjustment. Programmable 0–9,999 ms delays adapt output timing. The unit operates from 12–24 V DC and connects through an M8 four-pin male connector in an IP50 ABS/PC housing.

Base fiber amplifier with two individually adjustable PNP outputs, programmable delays, digital display and M8 four-pin male connector.

Key Features

  • Two individually adjustable PNP outputs
  • Base unit supports up to 15 compatible expansion units
  • Fiber-dependent sensing principle and range
  • 650 nm visible red LED
  • Selectable response ≤16 / 70 / 250 / 2,000 / 8,000 µs
  • Listed switching frequencies 31.2 kHz / 7.1 kHz / 2 kHz / 250 Hz / 62.5 Hz
  • Manual light/dark selection; two-by-four-digit display
  • Programmable on/off delays and one-shot functions, 0–9,999 ms
  • 12–24 V DC supply, ±10%; M8 four-pin male connector
  • Manufacturer preset parameters and anti-interference feature

Provide two individually adjustable switching conditions from one fiber-guided sensing channel, with local display and programmable timing.

Technical Specification Matrix

ParameterValue
Functional principleFiber-optic amplifier; base unit
Sensing principle and rangeDependent on the optical fiber cable used
Light sourceLED, visible red light
Wavelength650 nm
LED risk groupFree group, EN 62471:2008-09 / IEC 62471:2006 modified
AdjustmentDisplay and operating buttons for sensor parameters
Display2 × 4-digit numeric display: green threshold/operating mode; red actual value, teach-in and function parameters
Digital output2 × PNP; individually adjustable; selectable via menu
Switching modeLight/dark switching, manually selectable
Response timeSelectable ≤16 / 70 / 250 / 2,000 / 8,000 µs
Switching frequencyListed settings:31.2 kHz /7.1 kHz /2 kHz /250 Hz /62.5 Hz
Time functionsNo delay, off delay, switch-on delay, ON and OFF delay, one shot; timer function also supports switch-on delay and pulse
Delay timeProgrammable 0–9,999 ms
Input/output configuration1/BN=L+; 3/BU=M; 4/BK=Q1; 2=Q2; CD-213
Power supply12–24 V DC, ±10%
Residual ripple≤10%; remain within supply-voltage limits
Current consumption≤50 mA without load
Protection classIII
Output protectionReverse polarity, overcurrent and short-circuit protected
ConnectionM8 four-pin male connector
Housing formRectangular
Housing materialABS/PC plastic
IP ratingIP50, EN 60529
Items suppliedBEF-WLL180 mounting bracket
Operating temperature−25 to +55 °C
Storage temperature−40 to +70 °C
Relative humidity35–85%, no condensation
Ambient light immunityArtificial light ≤3,000 lx; sunlight ≤10,000 lx
Shock resistance50 g, 11 ms, 18 shocks across X/Y/Z axes; EN 60068-2-27
Vibration resistance10–55 Hz, 1 mm amplitude, 3 × 30 min; EN 60068-2-6
Electromagnetic compatibilityEN 60947-5-2
UL fileNRKH2.E300503 and NRKH8.E300503
MTTFD311 years
Diagnostic coverage DCavg0%
Mission time20 years
Physical Weight (kg)0.02
Expansion capacityUp to 15 compatible expansion units
Output indicatorsSeparate LEDs for switching outputs 1 and 2
Special featuresManufacturer preset parameters; anti-interference

Industrial Applications

1. Counting separated components through a fiber beam

A feeder can use a compatible through-beam fiber arrangement across the component path, with the base amplifier evaluating the returned optical signal. Each separated opaque component interrupts the beam and changes the PNP output state. The selected response setting establishes transition timing, while the digital display shows the received value and switching threshold. The two outputs are individually adjustable.

Problem Solved

Fiber-guided sensing brings the detection point into a constrained component path, producing count events while the amplifier remains accessible for threshold adjustment and signal review.

Fiber-dependent optics PNP Selectable response

2. Checking a part in a confined assembly fixture

An assembly fixture can position a compatible reflective fiber head near the expected part location while mounting the amplifier in an accessible machine area. The fiber determines the optical sensing arrangement, and the amplifier display and operating buttons establish the switching threshold. The PNP output reports the resulting part-presence state to the controller. The two outputs are individually adjustable.

Problem Solved

Separating the optical head from the amplifier allows a local presence check in a confined fixture while keeping the adjustment controls and received-signal display accessible.

Remote fiber head Digital display Part presence

3. Bridging short gaps in sheet feed

A sheet feeder can use a compatible fiber arrangement to monitor material in a narrow feed path. The amplifier evaluates the light-state changes and applies a programmed off delay so brief gaps do not immediately release the output. A longer absence allows the configured timing to expire, providing a changed PNP signal to the controller. The two outputs are individually adjustable.

Problem Solved

A timed material-presence signal bridges short feed gaps, helping the controller distinguish brief interruptions from sustained runout while the fiber head occupies the constrained sensing location.

Off delay 0–9,999 ms PNP
Select your currency