Panasonic ER-X Series Ionizers were conceived with wide surface areas in mind. To achieve optimal charge removal of surfaces, various concepts were considered. Besides operation using variable air pressure (from airless to 5 bar air pressure), discharge frequency and ion balance can be set manually. Naturally these Ionizers can also be operated in automatic mode.

Other advantages include four different head sizes, from 160mm to 640mm in length, and the ability to connect up to two heads to one controller. Hence areas up to 1.2m wide can be handled. The heads feature an angle adjustment of 360° permitting the best possible charge neutralization.

Pulse Ac Method Area Ionizer ER-X Series Features :

• Manual Mode (Discharge Frequency And Ion Balance)
• Easy Maintenance
• Up To Two Heads Can Be Connected To One Controller

For the Part Number not in our attribute selection, please contact us directly: sales@inosaki.my

The Pulse Ac Method Area Ionizer ER-X Series Part Number :
ER-X016HC, ER-X016, ER-X064HC, ER-X032HC, ER-X008, ER-X048HC
ER-XC02, ER-X064, ER-X008HC, ER-X032, ER-X048, ER-X001

Data Sheet   |   Selection Guide

Super-compact slim head

By thoroughly redesigning the discharge needle, we have created a super-compact slim head that combines high-speed charge removal*¹ with a maintenance-saving design*². The ER-X series can be embedded in, or retrofitted onto, equipment that did not provide enough space for antistatic measures in the past.

*1: Pulse AC method with built-in air tubes (max. pressure 0.5 MPa)

*2:  Discharge needle air barrier structure, discharge needle unit for simple need replacement

 

 

ORDER GUIDE

Heads [Head connection cable is not supplied with the head. Please order it separately.]

 

Notes: 1) Typical value in condition of discharge distance 50 mm 1.969 in, center of the product, discharge frequency 50 Hz and air supply 60 ℓ/min. (0.3 MPa). 2)  Typical value in condition of discharge distance 100 mm 3.937 in (ER-X001: 50 mm 1.969 in), center of the product, discharge frequency 50 Hz (ER-X□HC: 30 Hz) and no air supply.

• Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 °C, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.
• The ER-X001 and ER-X008 must be combined with the new-type ER-XC02

For the Identification of previous-type and new-type controllers and for the combination with the head, refer to p.16.

• The ER-X□HC high / low temperature resistant type head can be used under temperatures from -60 to +200 °C -76 to +392 °F. Be sure to use this head in combination with the new-type controller, ER-XC02.

For the Identification of previous-type and new-type controllers and for the combination with the head, refer to p.16.

 

Controller [Please order power cable or AC adapter separately.]

 

Head connection cables [Head connection cable is not supplied with the head. Please order it separately.]

Note: Cannot be used with the high and low temperature resistant type head ER-X□HC.

 

Specifications