PM-24, Ultra-small U-shaped Micro Photoelectric Sensor [Amplifier Built-in] - Panasonic

Name: PM-24, Ultra-small U-shaped Micro Photoelectric Sensor [Amplifier Built-in] - Panasonic
SKU: 16471
Availability: OutOfStock

Out of Stock

PM-24, Ultra-small U-shaped Micro Photoelectric Sensor [Amplifier Built-in] – Panasonic

$ 14.30 – $ 28.60

Out of stock

SKU: N/A

Model

Description

Specifications

Type		Ultra-small
Type			With flexible cable
Model No.	NPN output	PM-□24	PM-□24-R
Model No.	PNP output	PM-□24P	–
Sensing range		5 mm 0.197 in (fixed)
Minimum sensing object		0.8 x 1.8 mm 0.031 x 0.071 in opaque object
Hysteresis		0.05 mm 0.002 in or less
Repeatability		0.03 mm 0.001 in or less
Supply voltage		5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		15 mA or less
Output		<NPN output type> NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 0.7 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current)<PNP output type> PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between output and + V) • Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
	Utilization category	DC-12 or DC-13
	Output operation	Incorporated with 2 outputs: Light-ON / Dark-ON
Response time		Under light received condition: 20 µs or less Under light interrupted condition: 100 µs or less (Response frequency: 1 kHz or more) (Note 2)
Operation indicator		Vermilion LED (lights up under light received condition)
Pollution degree		3 (Industrial environment)
Ambient temperature (Note 3, 4)		–25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –30 to +80 ℃ –22 to +176 ℉
Ambient humidity		35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance		Fluorescent light: 1,000 ℓx at the light-receiving face
EMC		EN 60947-5-2
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
Shock resistance		15,000 m/s² acceleration (1,500 G approx.) in X, Y and Z directions for three times each
Emitting element		Infrared LED (Peak emission wavelength: 940 nm 0.037 mil, non-modulated)
Material		Enclosure: PBT, Slit cover: Polycarbonate
Cable		0.09 mm² 4-core cabtyre cable [PM-□24-R: 0.1 mm² flexible, oil and heat resistant cabtyre cable (Note 5)], 1 m 3.281 ft long
Cable extension		Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight		Net weight: 10 g approx.

Notes:

1)	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2)	The response frequency is the value when the disc, given in the figure below, is rotated.
3)	In case the PM-24 series is used at an ambient temperature of +50 ℃ +122 ℉, or more, make sure to mount it on a metal body.
4)	Take care that the flexibility of the PM-□24-R cable is lost if the ambient temperature in –10 ℃ +14 ℉ or less.
5)	The cable of PM-□24-R is a flexible cable usable on a moving base. When the sensor is mounted on a moving base, fix the sensor cable joint so that stress is not applied to it. (Models other than the PM-□24-R cannot be used on a moving base.)