Siemens 6ES7953-8LJ31-0AA0 SIMATIC S7 Micro Memory Card

USD 264.84

Siemens 6ES7953-8LJ31-0AA0 is a 512 KB, 3.3 V SIMATIC S7 Micro Memory Card for S7-300/C7/ET 200. Siemens lists phase-out announced (PM400).

SKU Siemens-6ES7953-8LJ31-0AA0 Category
Top Brands > Siemens > Siemens Memory Card

Siemens 6ES7953-8LJ31-0AA0 SIMATIC S7 Micro Memory Card

BrandSiemens
Model IdentifierSIMATIC S7 Micro Memory Card 512 KB
Official Part Number6ES7953-8LJ31-0AA0

Technical Overview

The Siemens 6ES7953-8LJ31-0AA0 is a 512 KB SIMATIC S7 Micro Memory Card for compatible S7-300, C7 and ET 200 controllers. Its 3.3 V nonvolatile Flash-EPROM storage is specified for at least 100,000 write/delete operations and at least 10 years of data retention after the final programming action. Siemens' technical data lists a 24 × 32 × 1.4 mm card body and an approximate physical weight of 2 g. The current manufacturer catalog lists phase-out announced (PM400), so its lifecycle status and compatibility with the exact controller should be checked when planning an installation.

512 KB, 3.3 V SIMATIC S7 Micro Memory Card with Flash-EPROM storage for compatible S7-300/C7/ET 200 controllers; phase-out announced (PM400).

Key Features

  • Exact Siemens article number 6ES7953-8LJ31-0AA0
  • 512 kbyte storage capacity in the SIMATIC S7 Micro Memory Card format
  • Nonvolatile Flash-EPROM memory technology
  • 3.3 V card operating voltage, supplied through the compatible host interface
  • Minimum 100,000 write/delete operations according to Siemens technical data
  • Minimum 10-year data retention after the final programming action
  • Intended for compatible S7-300, C7 and ET 200 controllers
  • 24 × 32 × 1.4 mm card body and approximately 2 g technical weight
  • Manufacturer lifecycle status: phase-out announced (PM400); not an unrestricted active-lifecycle product

Lifecycle notice: Siemens lists phase-out announced (PM400) for this 512 KB Micro Memory Card.

Technical Specification Matrix

ParameterValue
Product typeSIMATIC S7 Micro Memory Card
Manufacturer article number6ES7953-8LJ31-0AA0
Memory capacity512 kbyte
Memory technologyFlash-EPROM; described as Nflash in the manufacturer product summary
Operating voltage3.3 V
Write/delete endurance100,000 operations minimum
Data retention10 years minimum after the final programming action
Compatible controller familiesS7-300 / C7 / ET 200; exact CPU, firmware and capacity compatibility must be verified
Interface / installationSIMATIC Micro Memory Card interface in a compatible controller; contact pin count and transfer bandwidth are not specified in the cited technical data
Power supply / consumptionHost-supplied 3.3 V card operation; separate power-consumption rating not published in the cited technical data
Operating and storage temperatureNot specified in the cited product technical data; verify the applicable controller and card documentation
Relative humidityNot specified in the cited product technical data
IP rating / housing materialNot specified in the cited product technical data
Lifecycle statusPM400 — phase-out announced; live SiePortal status is Phase Out Announce
Phase-out announcement effective date1 October 2023, as recorded in Siemens Industry Mall
Country of originGermany
EAN / UPC4047623402640 / 804766337154
Minimum order / packing quantity1 piece / 1 piece
Physical Weight (kg)0.002
Dimensions L x W x H (cm)3.2 x 2.4 x 0.14
Physical measurement basisTechnical card weight is approximately 2 g. Dimensions map Siemens' 32 mm height, 24 mm width and 1.4 mm depth to card long side × short side × thickness.
Separate commercial weight entrySiemens commercial data separately lists net weight as 0.017 kg; the physical-weight measurement above uses the technical card specification.
Packaging dimensions11.5 × 9.2 × 0.32 cm (L × W × H); these are packaging dimensions, not card dimensions

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Program storage in a compatible SIMATIC controller

An installed S7-300, C7 or ET 200 controller requires the correct SIMATIC Micro Memory Card and sufficient capacity for its application program.

Potential use

Use the specified 512 KB card only where the exact controller and firmware documentation supports this article. Check usable load-memory requirements and follow Siemens' programming and handling procedures.

512 KB SIMATIC Micro Memory Card Flash-EPROM 3.3 V

2. Maintenance program backup for an existing installation

A maintenance team needs a documented memory-card article for a compatible installed controller and a controlled copy of its approved application program.

Potential use

The nonvolatile memory and published retention/endurance ratings can support a suitable program-storage workflow. Validate the stored project and CPU compatibility, manage write cycles, and account for the announced phase-out when planning spare parts.

10-year minimum retention 100,000 write/delete operations S7-300/C7/ET 200 PM400 notice
Select your currency