Omron CS1W-CN626 6 m Peripheral Port Connecting Cable

Omron CS1W-CN626 6 m Peripheral Port Connecting Cable. 6 m
peripheral-port cable | Peripheral bus and Host Link. Supply status not
confirmed.

SKU Omron-CS1W-CN626 Category
Top Brands > Omron > Omron Host Link Cables

Omron CS1W-CN626 6 m Peripheral Port Connecting Cable

BrandOmron
Model IdentifierCS1W-CN626
Official Part NumberCS1W-CN626

Technical Overview

The CS1W-CN626 is an Omron peripheral-port connecting cable for linking a D-sub 9-pin computer to the peripheral port of a CS-series CPU Unit. Omron’s controller catalog lists a 6 m cable and states it can be used for peripheral bus and Host Link. Current supply status was not established from the checked manufacturer source.

6 m peripheral-port cable | Peripheral bus and Host Link.

Key Features

  • Exact Omron model listed in controller catalog
  • Connects a D-sub 9-pin computer to a CS-series CPU peripheral port
  • 6 m cable length
  • Supports peripheral bus and Host Link
  • Supply status: Unknown
  • Check model compatibility with the applicable Omron installation manual
  • Check model compatibility with the applicable Omron installation manual
  • Check model compatibility with the applicable Omron installation manual

6 m peripheral-port cable | Peripheral bus and Host Link

Technical Specification Matrix

ParameterValue
Product typePeripheral-port connecting cable
Cable length6 m
Computer connectorD-sub, 9-pin
PLC connectionCS-series CPU Unit peripheral port
Communication modesPeripheral bus or Host Link
Physical Weight (kg)Not stated in the checked manufacturer source.
Dimensions L x W x H (cm)Cable length is 6 m; width and height are not stated.
Supply statusUnknown; exact model and product specifications confirmed from Omron documentation, current availability not established.

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Industrial automation system connection

The CS1W-CN626 is an Omron peripheral-port connecting cable for linking a D-sub 9-pin computer to the peripheral port of a CS-series CPU Unit.

Potential use

Confirm PLC series, port, rack configuration, electrical interface and protocol compatibility against the applicable Omron manual before selection.

CS1W-CN626 Omron automation

2. PLC rack or serial interface connection

Use the cable or communications board in a compatible Omron PLC installation.

Potential use

Confirm controller series, port type, rack configuration and required protocol before installation.

PLC connection industrial automation

3. Controller maintenance and commissioning

Support connection, expansion or communications during compatible PLC setup and service.

Potential use

Follow the relevant Omron installation manual and verify interface compatibility.

PLC maintenance commissioning
Select your currency