Omron E3Z-R61K-M3J Compact Photoelectric Sensor

USD 147.28

Omron E3Z-R61K-M3J: retro-reflective with MSR sensor, up to 3 m, NPN, IP67.

SKU Omron-E3Z-R61K-M3J Category
Top Brands > Omron > Omron Photoelectric Sensors

Omron E3Z-R61K-M3J Compact Photoelectric Sensor

BrandOmron
Model IdentifierE3Z-R61K-M3J
Official Part NumberE3Z-R61K-M3J

Technical Overview

The Omron E3Z-R61K-M3J is a compact, built-in-amplifier retro-reflective with MSR photoelectric sensor. Its sensing distance is up to 3 m with the specified reflector and it provides a NPN output. The model uses a oil-resistant M8 connector with 0.3 m cable, 12–24 V DC supply, 1 ms max response and IP67 protection.

NPN photoelectric sensor, retro-reflective sensing up to 3 m.

Key Features

  • Compact photoelectric sensor with built-in amplifier
  • Retro-reflective with msr
  • Up to 3 m sensing distance with specified reflector
  • NPN open-collector output
  • Red LED, 660 nm
  • 12–24 V DC supply
  • oil-resistant M8 connector with 0.3 m cable
  • Selectable Light-ON/Dark-ON
  • IP67 protection

NPN output | up to 3 m | IP67

Technical Specification Matrix

ParameterValue
ManufacturerOmron
Product typeCompact photoelectric sensor with built-in amplifier
Sensing methodretro-reflective with MSR
Sensing distance3 m maximum with E39-R1S reflector; minimum sensor-to-reflector spacing 100 mm
Output typeNPN open collector
Light sourceRed LED, 660 nm
Power supply12–24 V DC ±10%
Current consumption30 mA max.
Response time1 ms max.
Operation modeLight-ON / Dark-ON selectable
Connectionoil-resistant M8 connector with 0.3 m cable
Degree of protectionIP67
Operating temperature-25 to 55°C; confirm limits for selected variant
Physical Weight (kg)Sensor-only weight not stated in the checked manufacturer source.
Dimensions L x W x H (cm)Overall L × W × H not stated in the checked source.
Supply statusUnknown; exact model specifications confirmed, current supply status not established.

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Reflector-based part presence sensing

Check a part or carrier at a fixed sensing point using a reflector.

Potential use

Select a compatible reflector and verify alignment, target size and sensor output polarity.

photoelectric sensing NPN

2. Packaging line monitoring

Monitor product passage at a conveyor or packaging station.

Potential use

Set Light-ON or Dark-ON mode and confirm response, wiring and optical conditions on the installed machine.

conveyor IP67
Select your currency