USD 64.99
Omron E2E-X10E2-Z 2M: shielded M30 proximity sensor, NPN NC, cable.
The Omron E2E-X10E2-Z 2M is an E2E shielded inductive proximity sensor with M30 cylindrical body and 10 mm sensing distance. This model provides a NPN three-wire DC output in NC operation and connects by cable. Omron specifies a 10–30 VDC supply, IP67 protection, nickel-plated brass housing and PBT sensing surface. Use the exact switching logic and installation clearances required by the control system.
Shielded Omron E2E M30 inductive sensor with 10 mm range, NPN NC output and cable.
| Parameter | Value |
|---|---|
| Manufacturer | Omron |
| Series | E2E |
| Product type | Shielded inductive proximity sensor |
| Sensing method | Inductive |
| Sensing distance | 10 mm |
| Mounting | Shielded / flush |
| Output | NPN DC three-wire |
| Operation mode | NC |
| Connection | cable |
| Standard cable length | 2 m |
| Thread size | M30 |
| Housing material | Nickel-plated brass |
| Sensing surface | PBT |
| Rated supply voltage | 10 to 30 VDC |
| Degree of protection | IP67 |
| Physical Weight (kg) | Not stated in the checked manufacturer product data. |
| Dimensions L x W x H (cm) | See manufacturer dimensional data; no complete overall L × W × H value stated. |
| Supply status | Unknown; exact specifications are confirmed, current supply status was not established. |
Engineering suggestions require suitability checks for your installation.
Detect a ferrous component at a machine station before the next automated operation.
Mount the shielded sensor at its rated 10 mm distance and use the NPN NC signal with a compatible input.
Provide a non-contact switching point for a machine fixture or metal target.
Use the cable and verify that the target material and installation clearances meet Omron's E2E specifications.
