USD 10.91
Omron EE-1009 is a locking connector for compatible photomicro sensors, with up to 20 mΩ contact resistance.
The Omron EE-1009 is a connector accessory for listed Omron photomicro sensors. It has a built-in lock to resist cable-only pullout, with removal performed by gripping the connector housing. Omron specifies contact resistance of 20 mΩ maximum under the stated test conditions and a minimum 50-cycle insertion/removal durability for the lock mechanism. The exact-model page lists EE-1009 as selling and a standard-stock model, updated 2026-07-10; the inventory field was shown as unavailable at that update.
A locking connector accessory for compatible Omron photomicro sensors.
| Parameter | Value |
|---|---|
| Product type | Photomicro sensor connector |
| Locking mechanism | Built-in; grip the housing to release |
| Contact resistance | 20 mΩ max. (at 20 mV max. and 100 mA max.) |
| Insertion/removal durability | 50 cycles min. for the lock mechanism |
| Insertion strength | Number of poles × 6 N max. |
| Ambient temperature | −10 to +60 °C |
| Housing material | Polybutylene phthalate (PBT) |
| Contact material | Phosphor bronze |
| Applicable photomicro sensors | EE-SX67[] (A, P, R; connector models only), EE-SX47[], EE-SY67[], EE-SPY31[]/41[], EE-SPX303N/403N |
| Physical Weight (kg) | Not stated in the manufacturer data checked |
| Dimensions L x W x H (cm) | See Omron's dimensional drawing; a consolidated L × W × H value is not stated. |
| Supply status | Active; Omron lists it as selling and standard-stock (updated 2026-07-10). Inventory was shown as unavailable at that update. |
Engineering suggestions require suitability checks for your installation.
Vibration or routine handling can pull on a photomicro sensor lead during machine operation or maintenance.
Use EE-1009 with a compatible Omron sensor and release it by gripping the connector housing, following Omron's removal instruction.
A sensor service task may require a separate connector accessory matched to the installed sensor model.
Confirm sensor compatibility and mating details before fitting the EE-1009 locking connector.
