Omron EE-1001 Photomicro Sensor Connector

USD 9.41

Omron EE-1001 is an uncabled connector for compatible photomicro sensors, with four terminals and a PBT housing.

SKU Omron-EE-1001 Category
Top Brands > Omron > Omron Accessories

Omron EE-1001 Photomicro Sensor Connector

BrandOmron
Model IdentifierEE-1001
Official Part NumberEE-1001

Technical Overview

The Omron EE-1001 is an uncabled connector accessory for compatible Omron photomicro sensors. Its four-position terminal arrangement is identified in Omron's drawing as +, L, OUT and −. Omron specifies a PBT housing and phosphor bronze contacts; the EE-1001 has no locking mechanism. Omron's exact-model page identifies the connector as selling and standard-stock, and its official family store listing still showed EE-1001 as a standard-stock model in September 2026.

A four-terminal, uncabled connector for compatible Omron photomicro sensors.

Key Features

  • Exact Omron part number EE-1001
  • Uncabled connector accessory for photomicro sensors
  • Four-position terminal arrangement: +, L, OUT and −
  • Applicable models include specified EE-SX, EE-SY and EE-SPY/EE-SPX photomicro sensors
  • Polybutylene terephthalate (PBT) housing
  • Phosphor bronze contacts
  • No locking mechanism
  • Current Omron item listing identifies EE-1001 as a selling, standard-stock model

A four-terminal accessory connector provides the +, L, OUT and − sensor connections in an uncabled format.

Technical Specification Matrix

ParameterValue
Product typePhotomicro sensor accessory connector
CableNo cable; connector accessory
Terminal arrangement1: +; 2: L; 3: OUT; 4: −
Applicable photomicro sensorsEE-SX67[] (A, P, R; connector models only), EE-SX47[], EE-SY67[], EE-SPY31[]/41[], EE-SPX303N/403N
Locking mechanismNone
Housing materialPolybutylene terephthalate (PBT)
Contact materialPhosphor bronze
Physical Weight (kg)Not stated in the manufacturer data checked
Dimensions L x W x H (cm)See Omron's dimensional drawing; the manufacturer does not state a consolidated L × W × H value.
Supply statusActive; Omron's exact-model page lists it as selling and standard-stock, and the official family store listing dated 2026-09-09 continues to list EE-1001 as a standard-stock model.

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Connector interface for a compatible photomicro sensor

A replacement or new sensor assembly may need the connector accessory specified for its photomicro sensor model.

Potential use

Use EE-1001 only with a compatible connector-model sensor listed by Omron, and verify the sensor's terminal layout before wiring.

Photomicro sensor accessory 4 terminals Uncabled

2. Accessible sensor lead termination

A machine builder may need to wire the sensor connection as part of a custom harness.

Potential use

Use the uncabled connector format to build the required lead, keeping the +, L, OUT and − assignments aligned with Omron's terminal drawing.

+ L OUT −
Select your currency