USD 12.40
Omron EE-1010 2M is a locking, four-conductor connector cable for compatible photomicro sensors.
The Omron EE-1010 2M is a 2 m connector cable for listed Omron photomicro sensors, with a built-in lock that resists cable-only pullout. Its standard cable is 4 mm in diameter with four 0.2 mm² conductors and 1.1 mm insulation diameter. The terminal arrangement is brown (+), pink (L), black (OUT) and blue (−). Omron lists the exact item as selling and standard-stock in its latest status record found, updated 2026-05-21; live inventory was not confirmed in the available status record.
A 2 m locking connector cable for compatible Omron photomicro sensors.
| Parameter | Value |
|---|---|
| Product type | Photomicro sensor connector with standard cable |
| Cable length | 2 m |
| Locking mechanism | Built-in; resists separation when the cable alone is pulled |
| Cable construction | 4 mm diameter, 4-conductor vinyl-insulated round cable |
| Conductor cross-section | 0.2 mm² |
| Insulation diameter | 1.1 mm |
| Terminal arrangement | Brown +; pink L; black OUT; blue − |
| Contact resistance | 15 mΩ max. (at 100 VDC max.) |
| Insertion strength | 68.6 N max. |
| Lock insertion/removal durability | 50 cycles min. |
| Applicable photomicro sensors | EE-SX67[] (A, P, R; connector models only), EE-SX47[], EE-SY67[], EE-SPY31[]/41[], EE-SPX303N/403N |
| Housing material | Polybutylene phthalate (PBT) |
| Contact material | Phosphor bronze |
| Physical Weight (kg) | Not stated in the manufacturer data checked |
| Dimensions L x W x H (cm) | See Omron's dimensional drawing; no consolidated L × W × H value for the cable assembly is stated. |
| Supply status | Active; Omron's exact-model listing says selling and standard-stock (updated 2026-05-21). Live inventory status was not confirmed. |
Engineering suggestions require suitability checks for your installation.
Cable movement during routine machine operation can stress a sensor connection.
Use the built-in EE-1010 lock with a compatible Omron photomicro sensor, and release the connector by gripping its housing as Omron instructs.
A sensor installation may need a factory-wired cable to reach the machine's receiving circuit.
Route the 2 m standard cable and connect conductors by Omron's brown, pink, black and blue terminal assignments.
