USD 33.99
Omron E2E-X8MD1 2M unshielded inductive proximity sensor with 8 mm sensing distance, 12–24 VDC two-wire NO output and 2 m cable.
The Omron E2E-X8MD1 2M is an unshielded M12 cylindrical inductive proximity sensor with an 8 mm nominal sensing distance and a pre-wired 2 m cable. Its two-wire DC normally open output operates from 12 to 24 VDC and is rated for 3 to 100 mA load current. The manufacturer lists IP67 protection for the pre-wired model, with additional oil-resistance and IP69K qualifications; present supply status is not confirmed by the cited lineup.
Unshielded M12 inductive proximity sensor with 8 mm sensing distance, two-wire DC NO output and 2 m pre-wired cable.
| Parameter | Value |
|---|---|
| Sensing principle | Inductive proximity sensing |
| Sensor format | Unshielded M12 cylindrical body; 47 mm body length |
| Sensing distance | 8 mm ±10% |
| Setting distance | 0 to 6.4 mm |
| Detectable object | Ferrous metal |
| Standard sensing object | Iron, 30 × 30 × 1 mm |
| Response frequency | 0.8 kHz |
| Output | Two-wire DC, normally open; 3 to 100 mA load current |
| Power supply | 12 to 24 VDC (including 10% peak-to-peak ripple), Class 2 |
| Leakage current | 0.8 mA max. |
| Connection method | Pre-wired 2 m PVC cable |
| Operating temperature | −25 to 70 °C |
| Storage temperature | −40 to 85 °C; no icing or condensation |
| Relative humidity | 35% to 95%, non-condensing |
| IP rating | IP67; IP67G and IP69K qualifications listed for the pre-wired model |
| Housing materials | Nickel-plated brass case; PBT sensing surface; PVC cable |
| Physical Weight (kg) | Approx. 0.070 kg, packed state |
| Dimensions L x W x H (cm) | 4.7 x 1.2 x 1.2 (47 mm body length; nominal M12 diameter) |
Engineering suggestions require suitability checks for your installation.
A conveyor or fixture may need a compact sensor to confirm that a steel component has reached a defined position.
The 8 mm inductive sensing distance can provide a non-contact presence signal for ferrous targets; verify target size, mounting clearance and switching distance in the application.
A machine station may need to detect a metal stop, clamp or moving mechanism at a repeatable point in its travel.
The two-wire DC normally open output and pre-wired 2 m cable support straightforward integration with compatible control inputs after electrical and mounting checks.
