Omron EE-SX676 NPN F-Shaped Photomicrosensor

USD 22.24

Omron EE-SX676 is an F-shaped 5 mm slot NPN photomicrosensor with 940 nm infrared source, selectable output and IP50.

SKU Omron-EE-SX676 Category
Top Brands > Omron > Omron Photomicro Sensors

Omron EE-SX676 F-Shaped Slot Photomicrosensor

BrandOmron
Model IdentifierEE-SX676
Official Part NumberEE-SX676

Technical Overview

The Omron EE-SX676 is an F-shaped connector photomicrosensor in the EE-SX47/67 non-modulated slot family. It uses a 940 nm infrared LED across a 5 mm slot and provides selectable Light-ON/Dark-ON NPN open-collector output from a 5–24 VDC supply. Omron specifies IP50 and a minimum 1 kHz response frequency; current supply status is recorded as Unknown.

An F-shaped 5 mm slot NPN photomicrosensor with selectable Light-ON/Dark-ON operation.

Key Features

  • Exact model EE-SX676, F-shaped connector type
  • 5 mm sensing distance (slot width)
  • Opaque sensing object: 2 × 0.8 mm minimum
  • 940 nm infrared LED
  • NPN open-collector output, Light-ON/Dark-ON selectable
  • 5–24 VDC ±10%; 12 mA max. current consumption
  • 1 kHz minimum response frequency (3 kHz average)
  • IP50 enclosure; approx. 2.2 g connector-model weight
  • Current manufacturer supply status is not established; recorded as Unknown

Detect objects passing through a 5 mm optical slot without contact.

Technical Specification Matrix

ParameterValue
Sensor typeSlot-type photomicrosensor, non-modulated
Model shapeF-shaped slot photomicrosensor; connector model
Sensing distance5 mm (slot width)
Sensing objectOpaque object, 2 × 0.8 mm minimum
Differential distance0.025 mm
Light sourceInfrared LED, peak wavelength 940 nm
OutputNPN open collector; Light-ON/Dark-ON selectable
Supply voltage5–24 VDC ±10%; ripple 10% max.
Current consumption12 mA max.
Response frequency1 kHz min. (3 kHz average)
Ambient temperatureOperating −25 to +55 °C; storage −30 to +80 °C, no icing or condensation
Ambient humidityOperating 5–85% RH; storage 5–95% RH, no condensation
ProtectionIP50 (IEC60529)
ConnectionFour-pole connector model; direct soldering possible
WeightApprox. 3.1 g, connector model
Physical Weight (kg)Approx. 2.2 g connector model
Dimensions L x W x H (cm)Approx. 0.0022 kg
Supply statusNot stated numerically for this variant in consulted specification

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Part passage confirmation

A small opaque component can be checked as it passes through a fixed sensing gap.

Potential use

The 5 mm slot and 2 × 0.8 mm minimum opaque target specification support evaluation for non-contact passage detection.

5 mm slot NPN 940 nm IR IP50

2. Mechanism position detection

A moving tab or flag may interrupt an optical path to indicate a machine state.

Potential use

Selectable Light-ON/Dark-ON NPN output can be wired to compatible logic after checking geometry, speed and switching margin.

1 kHz min Selectable output 4-pole connector Compact sensor
Select your currency