USD 51.09
Omron E2E-C03SR8-WC-B1 2M is a shielded 3 mm inductive sensor with 0.8 mm sensing, PNP NO output, 2 m cable and IP67 protection.
The Omron E2E-C03SR8-WC-B1 2M is a shielded, 3 mm cylindrical inductive proximity sensor for ferrous-metal detection at a nominal 0.8 mm distance. It uses a DC three-wire PNP open-collector, normally open output with a 5 kHz response and a 2 m oil-resistant PVC cable. The sensor operates from 10–30 VDC and is rated IP67; Omron currently lists the exact model as selling and standard stock.
A shielded 3 mm inductive sensor with 0.8 mm sensing distance, PNP NO output, 2 m cable and IP67 protection.
| Parameter | Value |
|---|---|
| Sensor type | Inductive proximity sensor; cylindrical, shielded, 3 mm diameter |
| Sensing distance | 0.8 mm ±10%; setting distance 0–0.56 mm |
| Standard target | Iron, 3 × 3 × 1 mm; ferrous metal (range decreases with non-ferrous metals) |
| Response frequency | 5 kHz |
| Output | DC three-wire PNP open collector, normally open; 50 mA max. |
| Power consumption | 10 mA maximum current consumption |
| Power supply | 10–30 VDC, including 10% peak-to-peak ripple |
| Indicator | Yellow operation indicator |
| Operating temperature | −25 to 70 °C |
| Storage temperature | −25 to 70 °C |
| Relative humidity | 35–95% RH, operating and storage |
| Connection | 2 m pre-wired oil-resistant PVC cable; brown +V, black output, blue 0 V |
| IP rating | IP67; oil-resistant to Omron company standard |
| Housing material | SUS303 stainless-steel case; heat-resistant ABS sensing face; PVC cable |
| Physical Weight (kg) | Approx. 0.025 (packaged weight) |
| Dimensions L x W x H (cm) | 1.85 x 0.3 x 0.3 (sensor; cable excluded) |
Engineering suggestions require suitability checks for your installation.
Assembly stations may need a compact non-contact signal when a steel component reaches a fixture or work position.
The shielded 3 mm sensor can be mounted flush where the target is within its specified 0.8 mm sensing range; verify target dimensions and surrounding metal clearances.
Small mechanisms can require a discrete position signal in environments exposed to oil or washdown splashes.
A 2 m oil-resistant cable and IP67 enclosure support installation planning for these conditions, subject to the actual fluid, temperature and cable-routing requirements.
