USD 262.44
Double-acting 50 mm compact cylinder, G1/8, M12x1.25 rod thread, 0.08–1 MPa, elastic cushioning, proximity switch ready.
Pneumatic compact cylinder with 50 mm piston diameter and double-acting operation. The datasheet lists stroke options from 1 mm to 300 mm, G1/8 pneumatic connection, piston rod thread M12x1.25, and elastic cushioning rings/plates at both ends. It supports compressed air to ISO 8573-1:2010 [7:4:4], operating pressure from 0.08 MPa to 1 MPa, and ambient temperatures from -20 °C to 80 °C. Construction uses a wrought aluminium alloy barrel and cover, high-alloy steel piston rod, and NBR/TPE-U(PU) dynamic seals.
| Parameter | Value |
|---|---|
| Stroke | 1 mm ... 300 mm |
| Piston diameter | 50 mm |
| Piston rod thread | M12x1.25 |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Piston-rod end | Male thread |
| Design | Piston rod |
| Position detection | Via proximity switch |
| Symbol | 00991217 |
| Variants | Piston rod at one end |
| Operating pressure | 0.08 MPa ... 1 MPa |
| Operating pressure | 0.8 bar ... 10 bar |
| Operating pressure | 11.6 psi ... 145 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Ambient temperature | -20 °C ... 80 °C |
| Impact energy in end positions | 0.64 J |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 1057 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1178 N |
| Moving mass for 0 mm stroke | 112 g |
| Additional moving mass per 10 mm stroke | 16 g |
| Basic weight for 0 mm stroke | 560 g |
| Additional weight per 10 mm stroke | 72 g |
| Type of mounting | With through-hole; with accessories |
| Pneumatic connection | G1/8 |
| Material collar screws | Galvanised steel |
| Material cover | Wrought aluminium alloy |
| Material dynamic seals | NBR; TPE-U(PU) |
| Material piston rod | High-alloy steel |
| Material cylinder barrel | Wrought aluminium alloy |
Used for short-to-medium stroke linear transfer in compact automation cells where a 50 mm bore provides moderate thrust with controlled end cushioning.
Provides repeatable linear motion in tight machine envelopes without hard end-stop impact.
Suitable for fixture clamping, stop gates, and indexing mechanisms that require bidirectional pneumatic force and position feedback.
Delivers dependable clamp/advance and retract motion with stroke flexibility from 1 mm to 300 mm.
Fits machine slides and guide mechanisms in environments using clean compressed air and moderate corrosion exposure.
Supports motion actuation across a wide temperature range with aluminium construction and corrosion class CRC 2.
