USD 711.90
5 MP mono GigE camera with Sony IMX264, global shutter, PoE or 12–24 VDC input, and IP30 housing.
Basler ace U monochrome GigE industrial camera with Sony IMX264LLR-C 2/3" global-shutter CMOS sensor, 5 MP resolution, and C-mount optics. The camera supports Fast Ethernet and Gigabit Ethernet, hardware/software trigger modes, PoE or 12–24 VDC supply via I/O connector, and IP30-rated protection. Basler documentation lists 2448 × 2048 default resolution, 22.7 fps at default settings, and compact housing for machine-vision integration.
| Parameter | Value |
|---|---|
| Resolution (full) | 2464 × 2056 pixels |
| Resolution (default) | 2448 × 2048 pixels |
| Resolution | 5 MP |
| Sensor type | Sony IMX264LLR-C progressive scan CMOS |
| Shutter type | Global shutter |
| Sensor format | 2/3" |
| Effective sensor diagonal | 11.1 mm |
| Pixel size | 3.45 × 3.45 µm |
| Spectrum | Visible |
| Frame rate at default settings | 22.7 fps |
| Image data interface | Fast Ethernet (100 Mbit/s), Gigabit Ethernet (1000 Mbit/s) |
| Image data stream protocol | GVSP |
| Synchronization | Hardware trigger, software trigger, free run |
| Exposure time control | Via hardware trigger and programmable via camera API |
| Camera power (PoE) | ≈3.3 W typical, ≈3.7 W max. |
| Camera power (I/O connector) | ≈2.7 W typical, ≈3.4 W max. @ 12–24 VDC |
| Power over Ethernet standard | IEEE 802.3af |
| I/O lines | 1 opto-coupled input line, 1 opto-coupled output line, 1 GPIO line |
| Lens mount | C-mount |
| Size without lens mount or connectors | 42.0 × 29 × 29 mm |
| Size with lens mount and connectors | 60.3 × 29 × 29 mm |
| Weight | <90 g |
| Conformity / protection | CE, EAC, UKCA, UL Listed, FCC, GenICam, GigE Vision, IP30, REACH, KC |
| Operating housing temperature | 0–50 °C |
| Operating humidity | 20–80% RH, non-condensing |
| Storage temperature | -20–80 °C |
| Storage humidity | 20–80% RH, non-condensing |
| Housing temperature according to UL 60950-1 | max. 70 °C |
| Ambient temperature according to UL 60950-1 | max. 30 °C |
| Opto-coupled input safe operating range | 0–24 VDC |
| Opto-coupled input absolute maximum | 30 VDC |
| Opto-coupled input logical 0 | 0–1.0 VDC |
| Opto-coupled input transition region | >1.0–2.2 VDC |
| Opto-coupled input logical 1 | >2.2 VDC |
| Opto-coupled input minimum current | 5 mA |
| Opto-coupled input current draw | 5–15 mA |
| Opto-coupled output safe operating range | 3.3–24 VDC |
| Opto-coupled output absolute maximum | 30 VDC |
| Opto-coupled output leakage current | <60 µA |
| Opto-coupled output maximum load current | 50 mA |
The global shutter, 22.7 fps default frame rate, and hardware triggering suit synchronized inspection of moving parts on conveyor lines.
Eliminates motion distortion while keeping timing deterministic for presence/absence checks.
The 5 MP mono sensor with 3.45 µm pixels provides enough spatial detail for reading small 1D/2D codes in controlled visible-light setups.
Improves code capture reliability on compact labels and etched markings.
Compact 60.3 × 29 × 29 mm housing, C-mount optics, and opto-coupled I/O make it suitable for vision-guided robot cells with limited space and hard real-time triggers.
Supports deterministic object localization and robot handoff timing in constrained cells.
