1. Starting Flow in an Equalized Media Circuit
A closed media circuit can have nearly equal upstream and downstream pressures when its valve receives an opening command. The forced-pilot VZWF design requires no minimum pressure differential, supporting valve actuation under that initial condition. This exact G1/4 version provides a 0–10 bar media range and 1.8 m³/h Kv; actual flow still depends on the system's pressure relationship after opening.
Problem Solved
The zero-differential actuation capability allows the valve to open when the circuit begins at equalized pressure, avoiding a minimum-differential prerequisite for the switching mechanism.
Zero required differential
Forced-pilot diaphragm
G1/4
2. Commanded Water Feed to a Process Station
A process station needs an electrical on/off command for a water feed line. The valve lists water as a supported medium and uses a 2/2 normally closed function with a 24 V DC coil. G1/4 connections and a 1.8 m³/h Kv define the flow interface, while the −10 to 80 °C media range and 0–10 bar operating limit provide the documented component conditions.
Problem Solved
Electrical 2/2 switching provides a defined feed command for the water line, with a normally closed valve state and documented media and flow characteristics.
Water medium
24 V DC
2/2 normally closed
3. On/Off Supply of Low-viscosity Mineral Oil
A machine controls a mineral-oil branch using an electrical feed command rather than a manually operated valve. Mineral oil is a listed medium, with a maximum viscosity of 22 mm²/s for this configuration. The NBR seals, cast-brass housing and non-reversible flow arrangement define the selected valve's construction, while the stated media pressure and temperature limits bound the operating case.
Problem Solved
The solenoid diaphragm mechanism supplies on/off oil-flow control through a documented material and viscosity envelope, giving the machine an electrical command point for the branch.
Mineral oil
22 mm²/s maximum
NBR seals