1. Local Direction Control of a Pneumatic Fixture
An operator needs to command the two movement directions of a pneumatic fixture from a local panel. The valve's 4/3-way closed-centre function provides two directional working states and a centre routing state through a direct manual rotary mechanism. G1/4 ports and the 1150 l/min standard nominal flow characterize the circuit interface, while front-panel mounting places the lever at the operator position.
Problem Solved
The hand lever provides local selection of directional flow and the closed-centre routing state, giving the operator a direct pneumatic control interface for the fixture movement.
4/3 closed centre
1150 l/min
Front-panel mounting
2. Manual Routing in a Dual-Pressure Test Circuit
A pneumatic test fixture uses different pressure levels at the valve's supply connections and needs local switching between working states. Festo explicitly permits dual-pressure operation when the pressure at port 1 is higher than at port 3. This condition, together with the 0–10 bar range and non-reversible flow, defines the documented circuit arrangement for using this exact manual valve in the test setup.
Problem Solved
Documented dual-pressure operation provides a supported routing option for a two-pressure circuit, with an explicit relationship between the supply pressures rather than an assumed unrestricted arrangement.
Dual-pressure operation
Port 1 > port 3
0–10 bar
3. Hand-Operated Vacuum Circuit Selection
A service or handling circuit needs manual valve routing that includes a vacuum connection. The exact datasheet permits vacuum operation only at port 3, so the supported arrangement is port-specific rather than freely reversible. The direct manual rotary valve and G1/4 interfaces provide the control and connection method, with 2 Nm actuating torque defining the documented effort at the lever.
Problem Solved
The port-specific vacuum allowance supports a defined manual routing arrangement for the circuit, while the hand lever provides direct operator control without requiring electrical actuation.
Vacuum at port 3 only
G1/4 ports
2 Nm actuation