Inosaki is one of the largest Phoenix Contact Distributors to provide terminal block, interface module, power supply and relay. And our best offer for terminal block types are Feed-through, Fuse Modular, Spring Cage, Double Level, and Multi-level, hence the series model references to PT Series, ST Series, TB Series, UT Series, UK Series. In additional for power supply are QUINT Power, STEP Power, Trio Power, and UNO Power. Please email us for catalog: sales@inosaki.com
Product Description
The TRIO CROSS POWER power supply for the CrossPowerSystem power distribution board is perfectly adapted for use in machine building. All of the functions and space-saving design are tailored to the high requirements in this area. The push-in connection enables quick and easy connection of a 24 V DC control voltage.
Dimensions
| Width |
36 mm |
| Height |
160 mm |
| Depth |
159 mm |
| Installation distance right/left |
0 mm / 0 mm |
| Installation distance right/left (active) |
14 mm / 14 mm |
| Installation distance top/bottom |
50 mm / 50 mm |
| Installation distance top/bottom (active) |
50 mm / 50 mm |
Ambient conditions
| Degree of protection |
IP20 |
| Inflammability class in acc. with UL 94 (housing / terminal blocks) |
V0 |
| Ambient temperature (operation) |
-25 °C … 70 °C (> 60 °C Derating: 2,5 %/K) |
| Ambient temperature (storage/transport) |
-40 °C … 85 °C |
| Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
| Climatic class |
3K3 (in acc. with EN 60721) |
| Degree of pollution |
2 |
| Installation height |
≤ 4000 m (> 2000 m, Derating: 10 %/1000 m) |
Input data
| Nominal input voltage range |
3x 400 V AC … 500 V AC |
|
2x 400 V AC … 500 V AC |
| Input voltage range |
3x 400 V AC … 500 V AC -20 % ….+15 % |
|
2x 400 V AC … 500 V AC -10 % … +15 % |
| AC frequency range |
50 Hz … 60 Hz |
| Discharge current to PE |
< 0.25 mA |
| Current consumption |
3x 0.4 A (400 V AC) |
|
3x 0.3 A (500 V AC) |
|
2x 0.6 A (400 V AC) |
|
2x 0.5 A (500 V AC) |
| Nominal power consumption |
243.6 VA |
| Mains buffering time |
typ. 20 ms (400 V AC) |
|
typ. 20 ms (500 V AC) |
| Input fuse |
3.15 A (internal (device protection), slow-blow) |
| Power factor (cos phi) |
0.55 |
| Type of protection |
Transient surge protection |
| Protective circuit/component |
Varistor |
Output data
| Nominal output voltage |
24 V DC ±1 % |
| Setting range of the output voltage (USet) |
24 V DC … 28 V DC (> 24 V DC, constant capacity restricted) |
| Nominal output current (IN) |
5 A |
| Dynamic Boost (IDyn.Boost) |
7.5 A (5 s) |
| Derating |
> 60 °C … 70 °C (2.5%/K) |
| Connection in parallel |
yes, for redundancy and increased capacity |
| Connection in series |
yes |
| Protection against overvoltage at the output (OVP) |
≤ 30 V DC |
| Control deviation |
< 1 % (change in load, static 10 % … 90 %) |
|
< 3 % (Dynamic load change 10 % … 90 %, 10 Hz) |
|
< 0.1 % (change in input voltage ±10 %) |
| Residual ripple |
≤ 20 mVPP |
| Output power |
120 W |
| Typical response time |
< 1 s |
| Maximum power dissipation in no-load condition |
< 1 W (400 V AC) |
| Power loss nominal load max. |
< 12 W (480 V AC) |
General
| Article Number |
1064922 |
| Net weight |
0.7 kg |
| Efficiency |
typ. 91 % (400 V AC) |
| MTBF (IEC 61709, SN 29500) |
> 2300000 h (25 °C) |
|
> 1300000 h (40 °C) |
|
> 620000 h (60 °C) |
| Insulation voltage input/output |
3 kV AC (type test) |
|
1.5 kV AC (routine test) |
| Degree of protection |
IP20 |
| Protection class |
II (in closed control cabinet) |
| Inflammability class in acc. with UL 94 (housing / terminal blocks) |
V0 |
| Assembly instructions |
Cross Power System |
Connection data, input
| Connection method |
Snap-on connection |
Connection data, output
| Connection method |
Push-in connection |
| Conductor cross section solid min. |
0.2 mm² |
| Conductor cross section solid max. |
4 mm² |
| Conductor cross section flexible min. |
0.2 mm² |
| Conductor cross section flexible max. |
2.5 mm² |
| Conductor cross section AWG min. |
24 |
| Conductor cross section AWG max. |
12 |
| Stripping length |
10 mm |
Connection data for signaling
| Connection method |
Push-in connection |
| Conductor cross section solid min. |
0.2 mm² |
| Conductor cross section solid max. |
1.5 mm² |
| Conductor cross section flexible min. |
0.2 mm² |
| Conductor cross section flexible max. |
1.5 mm² |
| Conductor cross section AWG min. |
24 |
| Conductor cross section AWG max. |
16 |
| Stripping length |
8 mm |
Standards
| EMC requirements for noise immunity |
EN 61000-6-2 |
| Standard – Safety of transformers |
EN 61558-2-16 (air clearances and creepage distances only) |
| Standard – Electrical safety |
IEC 61010-1 (SELV) |
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations |
EN 50178/VDE 0160 (PELV) |
| Standard – Safety extra-low voltage |
IEC 61010 (SELV) / (PELV) |
| Standard – Safe isolation |
DIN VDE 0100-410 |
| Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
| Overvoltage category EN 61010-1 |
II |
Conformance/approvals
| UL approvals |
UL Listed UL 61010-2-201 |
EMC data
| Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
| Low Voltage Directive |
Conformance with Low Voltage Directive 2014/35/EC |
| Conducted noise emission |
EN 55016 |
|
EN 61000-6-4 (Class A) |
| Noise emission |
EN 55016 |
|
EN 61000-6-4 (Class A) |
| Electrostatic discharge |
EN 61000-4-2 |
| Contact discharge |
6 kV (Test Level 4) |
| Discharge in air |
8 kV (Test Level 4) |
| Electromagnetic HF field |
EN 61000-4-3 |
| Frequency range |
80 MHz … 6 GHz |
| Test field strength |
10 V/m (Test Level 3) |
| Comments |
Criterion A |
| Fast transients (burst) |
EN 61000-4-4 |
| Input |
4 kV (Test Level 4 – asymmetrical) |
| Output |
2 kV (Test Level 3 – asymmetrical) |
| Signal |
1 kV (Test Level 2 – asymmetrical) |
| Comments |
Criterion A |
| Input |
3 kV (Test Level 3 – symmetrical) |
|
6 kV (Test Level 4 – asymmetrical) |
| Output |
1 kV (Test Level 2 – symmetrical) |
|
2 kV (Test Level 1 – asymmetrical) |
| Signal |
1 kV (Test Level 1 – symmetrical) |
| Comments |
Criterion B |
| Conducted interference |
EN 61000-6-2 |
| Voltage dips |
EN 61000-4-11 |
| Voltage |
230 V AC |
| Frequency |
50 Hz |
| Voltage dip |
70 % |
| Number of periods |
25 periods |
| Additional text |
Test Level 2 |
| Comments |
Criterion A |
| Voltage dip |
40 % |
| Number of periods |
10 periods |
| Additional text |
Test Level 2 |
| Comments |
Criterion A |
| Voltage dip |
0 % |
| Number of periods |
1 period |
| Additional text |
Test Level 2 |
| Comments |
Criterion A |
| Criterion A |
Normal operating behavior within the specified limits. |
| Criterion B |
Temporary impairment to operational behavior that is corrected by the device itself. |
Environmental Product Compliance
| REACh SVHC |
Lead 7439-92-1 |
