TeSys Deca – LC1D – 4 Poles (4NO) Contactor, 25A – Schneider Contactors & Reversing Contactors
USD $ 40.95 – USD $ 93.24
SKU: N/A
Specifications
| Main | ||
| Part Number | LC1DT25BDC | LC1DT25M7C |
| Product Series | TeSys Deca | TeSys Deca |
| Product Series | TeSys Deca | TeSys Deca |
| product type | Contactor | Contactor |
| product short name | LC1D | LC1D |
| Application field of contactor | Applied to non-inductive or micro-inductive loads, and resistance furnaces to AC loads with a power factor greater than or equal to 0.95 |
Applied to non-inductive or micro-inductive loads, and resistance furnaces to AC loads with a power factor greater than or equal to 0.95 |
| use category | AC-1AC -3 |
AC-1AC -3 |
| number of poles | 4P | 4P |
| Rated working voltage [Ue] | Power circuit: <= 690 V AC 25…400 Hz Power circuit: <= 300 V DC |
Power circuit: <= 690 V AC 25…400 Hz Power circuit: <= 300 V DC |
| Rated operating current [Ie] | 25 A 60 °C) at <= 440 V AC AC-1 for power circuits 12 A 60 °C) at <= 440 V AC AC-3 for power circuits |
25 A 60 °C) at <= 440 V AC AC-1 for power circuits 12 A 60 °C) at <= 440 V AC AC-3 for power circuits |
| [Uc] control circuit voltage | 24 V DC | 230V AC 50/60Hz |
| Additional information | ||
| model | LC1D | LC1D |
| Loop contact type | 4 NO | 4 NO |
| protection cap | None | None |
| Conventional thermal current [Ith] | 25 A at <60 °C for power circuits 10 A at <60 °C for signal circuits |
25 A at <60 °C for power circuits 10 A at <60 °C for signal circuits |
| Rated short-time withstand current [Icw] | 105 A at <40 °C – 10 s for power circuit 210 A at <40 °C – 1 s for power circuit 30 A at <40 °C – 10 min for power circuit 61 A at <40 °C – 1 minute for power circuit 100 A – 1 s for signal circuit 120 A – 500 ms for signal circuit 140 A – 100 ms for signal circuit |
105 A at <40 °C – 10 s for power circuit 210 A at <40 °C – 1 s for power circuit 30 A at <40 °C – 10 min for power circuit 61 A at <40 °C – 1 minute for power circuit 100 A – 1 s for signal circuit 120 A – 500 ms for signal circuit 140 A – 100 ms for signal circuit |
| Fuses for use with relays | 10 A gG for signal circuits according to IEC 60947-5-1 40 A gG at <= 690 V for power circuits type 1 25 A gG for power circuits for type 2 at <= 690 V |
10 A gG for signal circuits according to IEC 60947-5-1 40 A gG at <= 690 V for power circuits type 1 25 A gG for power circuits for type 2 at <= 690 V |
| average impedance | 2.5 mΩ – Ith 25 A 50 Hz for power loop | 2.5 mΩ – Ith 25 A 50 Hz for power loop |
| Rated insulation voltage [Ui] | Power circuit: 690 V conforming to IEC 60947-4-1 Signal circuit: 690 V conforming to IEC 60947-1 |
Power circuit: 690 V conforming to IEC 60947-4-1 Signal circuit: 690 V conforming to IEC 60947-1 |
| Overvoltage category | III | III |
| pollution level | 3 | 3 |
| Rated impulse withstand voltage [Uimp] | 6 kV according to IEC 60947 | 6 kV according to IEC 60947 |
| Safety and reliability level | B10d = Contactor for 1369863 nominal loads according to EN/ISO 13849-1 B10d = Contactor for 20000000 mechanical loads according to EN/ISO 13849-1 |
B10d = Contactor for 1369863 nominal loads according to EN/ISO 13849-1 B10d = Contactor for 20000000 mechanical loads according to EN/ISO 13849-1 |
| Mechanical life | 30 Mcycles | 15 Mcycles |
| Electrical life | 0.8 Mcycles <= 440 V at 25 A AC-1 Ue | 0.8 Mcycles <= 440 V at 25 A AC-1 Ue |
| Control loop characteristics | DC standard | AC at 50/60 Hz |
| Surge Suppression Module | Built-in bidirectional peak current limiting diode | No built-in surge suppression module |
| Control voltage limit | 0.1…0.25 Uc -40…60 °C release 0.7…1.25 Uc -40…60 °C run |
0.3…0.6 Uc -40…60 °C release 50/60 Hz 0.8…1.1 Uc -40…60 °C run 50 Hz 0.85…1.1 Uc -40…60 °C run 60 Hz |
| Surge power (W) | 5.4W (20°C) | |
| Holding power consumption(W) | 5.4 W at 20 °C | |
| Rated operating power (W) | 5.4W | |
| action time | 55 ms to close, 20 ms to break |
12…22 ms close 4…19 ms break |
| time constant | 28ms | |
| operating frequency | 3600 cycles/h at <60 °C | 3600 cycles/h at <60 °C |
| Wiring capacity | Power circuit: screw fastening1 1…4 mm² Lug O.D. Ø: 8 mm Cable option: flexible cord without wire terminal Power Circuit: screw fastening2 1…4 mm² Lug O.D. Ø: 8 mm Cable Selection: flexible cord without wire terminals Power circuit: screw fastening1 1…4 mm² Lug outer diameter Ø: 8 mm Cable selection: flexible cord with wire terminal Power circuit: screw fastening2 1…2.5 mm² Lug outer diameter Ø: 8 mm Cable option: flexible with wire terminals Power circuit: screw fastening1 1…4 mm² Lug outer diameter Ø: 8 mm Cable option: Solid without wire terminals Power circuit : Bolt fastening2 1…4 mm² Lug O.D. Ø: 8 mm Cable option: Rigid without wire terminals Control circuit: Bolt tight1 1…4 mm² Cable option: Flexible wire without wire terminals Control circuit: screw-on2 1…4 mm² Cable option: flexible without cable terminals Control circuit: screw-on1 1…4 mm² cable option: flexible with cable terminals Control circuit: screw-on2 1…2.5 mm² cable selection: flexible wire with wire terminals control circuit: screw fastened1 1…4 mm² cable selection: rigid without wire terminal control circuit: screw fastened2 1…4 mm² cable selection : Hard wire without wire terminal |
Power circuit: screw fastening1 1…4 mm² Lug O.D. Ø: 8 mm Cable option: flexible cord without wire terminal Power Circuit: screw fastening2 1…4 mm² Lug O.D. Ø: 8 mm Cable Selection: flexible cord without wire terminals Power circuit: screw fastening1 1…4 mm² Lug outer diameter Ø: 8 mm Cable selection: flexible cord with wire terminal Power circuit: screw fastening2 1…2.5 mm² Lug outer diameter Ø: 8 mm Cable option: flexible with wire terminals Power circuit: screw fastening1 1…4 mm² Lug outer diameter Ø: 8 mm Cable option: Solid without wire terminals Power circuit : Bolt fastening2 1…4 mm² Lug O.D. Ø: 8 mm Cable option: Rigid without wire terminals Control circuit: Bolt tight1 1…4 mm² Cable option: Flexible wire without wire terminals Control circuit: screw-on2 1…4 mm² Cable option: flexible without cable terminals Control circuit: screw-on1 1…4 mm² cable option: flexible with cable terminals Control circuit: screw-on2 1…2.5 mm² cable selection: flexible wire with wire terminals control circuit: screw fastened1 1…4 mm² cable selection: rigid without wire terminal control circuit: screw fastened2 1…4 mm² cable selection : Hard wire without wire terminal |
| Tightening torque | Power circuit: 1.7 Nm via screwdriver Ø 6 flat power circuit: 1.7 Nm via screwdriver No 2 Phillips screw control circuit: 1.7 Nm via screwdriver Ø 6 flat control circuit: 1.7 Nm via screw Screwdriver No. 2 for fastening Phillips screw Power circuit: 1.7 Nm Screwdriver Ø 6 flat-blade screw via cable connector: M3.5 Power circuit : 1.7 Nm Phillips screw driver No. 2 via cable connector Screw: M3.5 Control circuit: 1.7 Nm Screwdriver pozidriv No 2 for screw tightening Power circuit: 1.7 Nm Screwdriver pozidriv No 2 for screw tightening |
Power circuit: 1.7 Nm via screwdriver Ø 6 flat power circuit: 1.7 Nm via screwdriver No 2 Phillips screw control circuit: 1.7 Nm via screwdriver Ø 6 flat control circuit: 1.7 Nm via screw Screwdriver No. 2 for fastening Phillips screw Power circuit: 1.7 Nm Screwdriver Ø 6 flat-blade screw via cable connector: M3.5 Power circuit : 1.7 Nm Phillips screw driver No. 2 via cable connector Screw: M3.5 Control circuit: 1.7 Nm Screwdriver pozidriv No 2 for screw tightening Power circuit: 1.7 Nm Screwdriver pozidriv No 2 for screw tightening |
| Auxiliary contact type | 1 NO + 1 NC | 1 NO + 1 NC |
| Auxiliary contact type | Type Mechanical connection 1 NO + 1 NC conforming to IEC 60947-5-1 Type mirrored with main contact status 1 NC conforming to IEC 60947-4-1 |
1 NO + 1 NC |
| Signal loop frequency | 25…400Hz | 25…400Hz |
| Minimum switching current [Imin] | 5 mA for signal loop | 5 mA for signal loop |
| Insulation resistance | > 10 MΩ for signal loops | > 10 MΩ for signal loops |
| non-overlapping time | 1.5 ms between de-energized NC and NO contacts 1.5 ms between energized NC and NO contacts |
1.5 ms between de-energized NC and NO contacts 1.5 ms between energized NC and NO contacts |
| installation method | Chassis mounting rail installation |
DIN rail installation base plate installation |
| environment | ||
| standard | IEC 60947-4-1 GB 14048.4 |
IEC 60947-4-1 GB 14048.4 |
| certified product | CCC CE UKCA |
CCC CE UKCA |
| IP protection class | IP2x front panel for main circuits conforming to IEC 60529 IP2x front panel for coil circuits conforming to IEC 60529 |
IP2x front panel for main circuits conforming to IEC 60529 IP2x front panel for coil circuits conforming to IEC 60529 |
| Protective measures | TH conforms to IEC 60068-2-30 | TH conforms to IEC 60068-2-30 |
| ambient air temperature | -40…60 °C operation 60…70 °C with derating -60…80 °C storage |
-40…60 °C operation 60…70 °C with derating -60…80 °C storage |
| working altitude | 3000 m None | 3000 m None |
| Fire resistance and abnormal high temperature resistance | 850 °C conforming to IEC 60695-2-11 | 850 °C conforming to IEC 60695-2-11 |
| Shock and vibration resistance | Shock resistance with contacts open (2 gn (5…300 Hz)) conforming to IEC 60068-2-6 Shock resistance with contacts closed ( 4 gn (5…300 Hz)) conforming to IEC 60068-2-6 Shock performance 11 ms with contacts open (10 gn) conforming to IEC 60068-2-27 Shock resistance 11 ms with contacts closed (15 gn) conforming to IEC 60068-2-27 |
Shock resistance with contacts open (2 gn (5…300 Hz)) conforming to IEC 60068-2-6 Shock resistance with contacts closed ( 4 gn (5…300 Hz)) conforming to IEC 60068-2-6 Shock performance 11 ms with contacts open (10 gn) conforming to IEC 60068-2-27 Shock resistance 11 ms with contacts closed (15 gn) conforming to IEC 60068-2-27 |
| high | 85 mm | 85 mm |
| width | 45 mm | 45 mm |
| depth | 99 mm | 92 mm |
| Product Weight | 0.365 kg | 0.365kg |
| packaging unit | ||
| Unit Type of Package 1 | PCE | PCE |
| Number of Units in Package 1 | 1 | 1 |
| Package 1 Height | 8.8cm | 8.8cm |
| Package 1 Width | 10.6 cm | 9.9 cm |
| Package 1 Length | 5.2 cm | 5.2 cm |
| Package 1 Weight | 382.3g | 381.48g |
| Unit Type of Package 2 | CAR | CAR |
| Number of Units in Package 2 | 20 | 21 |
| Package 2 Height | 30.0cm | 30.0cm |
| Package 2 Width | 40.0cm | 40.0cm |
| Package 2 Length | 15.0cm | 15.0cm |
| Package 2 Weight | 7.696 kg | 8.061kg |
| Unit Type of Package 3 | PAL | PAL |
| Number of Units in Package 3 | 320 | 336 |
| Package 3 Height | 60.0cm | 60.0cm |
| Package 3 Width | 80.0cm | 80.0cm |
| Package 3 Length | 75.0cm | 75.0cm |
| Package 3 Weight | 122.536kg | 128.376 kg |
| contract warranty | ||
| Warranty | 18 months | 18 months |
| Weight | N/A |
|---|---|
| Dimensions | N/A |
