Standard Type – Linear Bushing – LM – THK

USD $ 6.72USD $ 37.59

SKU: N/A

Specifications

 

Model No. Ball rows Main dimensions Eccentricity(max) Radialclearancetolerance Basic load rating Mass
Inscribed bore diameter Outer diameter Length L1 Tolerance L2 D0 Dynamic
rating
C
Static
rating
C0
dr Tolerance D Tolerance L Tolerance
mm mm mm mm mm mm mm mm mm mm µm µm N N g
LM3 4 3 0-0.008 7 0-0.009 10 0-0.12 8 -2 88.2 108 1.4
LM4 4 4 8 12 8 -3 88.2 127 1.9
LM5 4 5 10 15 10.2 0-0.2 1.1 9.6 8 -3 167 206 4
LM6 4 6 0-0.009 12 0-0.011 19 0-0.2 13.5 1.1 11.5 12 -5 206 265 8
LM8S 4 8 15 17 11.5 1.1 14.3 12 -5 176 225 11
LM8 4 8 15 24 17.5 1.1 14.3 12 -5 265 402 16
LM10 4 10 19 0-0.013 29 22 1.3 18 12 -5 373 549 30
LM12 4 12 21 30 23 1.3 20 12 -5 412 598 31.5
LM13 4 13 23 32 23 1.3 22 12 -7 510 775 43
LM16 5 16 28 37 26.5 1.6 27 12 -7 775 1180 69
LM20 5 20 0-0.010 32 0-0.016 42 30.5 1.6 30.5 15 -9 863 1370 87
LM25 6 25 40 59 0-0.3 41 0-0.3 1.85 38 15 -9 980 1570 220
LM30 6 30 45 64 44.5 1.85 43 15 -9 1570 2750 250
LM35 6 35 0-0.012 52 0-0.019 70 49.5 2.1 49 20 -13 1670 3140 390
LM40 6 40 60 80 60.5 2.1 57 20 -13 2160 4020 585
LM50 6 50 80 0-0.022 100 74 2.6 76.5 20 -13 3820 7940 1580
LM60 6 60 0-0.015 90 110 85 3.15 86.5 25 -16 4710 10000 2000

 

Model Number Coding

Model Nominal shaft diameter (mm) Case material Retainer material Seals
LM 12 GA
LM : metric Japan series 3~60 No symbol : Standard steel No symbol : Resin*1 No symbol: No seals
LME : metric Eupore series M(G) : Stainless steel GA : Metal UU : Ends seals

 

Note 1: Since this model contains a synthetic resin retainer, do not use in environments exceeding 80°C. If ambient temperature is to exceed 80°C, use the type equipped with a metal retainer (model LM-GA, LME-GA, or LM-MGA).

Dimensions N/A
Inner Dia. (mm)

20, 25, 30, 35, 40, 50, 60, 3, 4, 5, 6, 8, 10, 12, 13, 16

Outer Dia. (mm)

, , , , , , , , , , , , , , ,

Length (mm)

, , , , , , , , , , , , , , , ,