Contact Us:
sales@inosaki.com

SIMATIC S7-300 – Front Connector For Signal Modules With Screw Contacts, 20-pole – Siemens Front Connectors

$ 14.03

SKU 6ES7392-1AJ00-0AA0 Category

The front connector permits the simple and user-friendly connection of the sensors and actuators to the I/O modules.

Siemens Front Connector SIMATIC S7-300 Product Specifications:

General information
Article Number 6ES7392-1AJ00-0AA0
Product type designation Front connector
Ambient conditions
Ambient temperature during operation
● min. 0 °C
● max. 60 °C
Ambient temperature during storage/transportation
● min. -40 °C
● max. 70 °C
Accessories
belongs to product S7-300
connection method / header
Connection I/O signals
● Connection method Screw terminals
● Number of lines per connection 1; or combination of 2 conductors of up to 1.5 mm² (total) in a shared ferrule
Conductor cross-section in mm²
— Connectable cable cross-sections for massive cables, min. 0.25 mm²
— Connectable cable cross-sections for massive cables, min. 1.5 mm²
— Connectable cable cross-sections for flexible cables without end sleeve, min. 0.25 mm²
— Connectable cable cross-sections for flexible cables without end sleeve, max. 1.5 mm²
— Connectable cable cross-sections for flexible cables with end sleeve, min. 0.25 mm²
— Connectable cable cross-sections for flexible cables with end sleeve, max. 1.5 mm²
Conductor cross-section acc. to AWG
— Connectable cable cross-sections for massive cables, min. 24
— Connectable cable cross-sections for massive cables, min. 16
— Connectable cable cross-sections for flexible cables without end sleeve, min. 24
— Connectable cable cross-sections for flexible cables without end sleeve, max. 16
— Connectable cable cross-sections for flexible cables with end sleeve, min. 24
— Connectable cable cross-sections for flexible cables with end sleeve, max. 16
Wire end processing
— Stripped length of cables, min. 6 mm
— Stripped length of cables, max. 6 mm
— End sleeve acc. to DIN 46228 without plastic sleeve Design A, 5 mm to 7 mm long
— End sleeve acc. to DIN 46228 with plastic sleeve Design E, up to 6 mm long
Mounting
— Tool Screwdriver, conical design, 3 mm to 3.5 mm
— Tightening torque, min. 0.4 N·m
— Tightening torque, max. 0.7 N·m
Dimensions
Width 23 mm
Height 131 mm
Depth 36 mm
Weights
Weight, approx. 70 g

Additional information

Weight 0.072 kg
Dimensions 4.2 × 14.3 × 2.9 cm

Related Products

SICK_sensor_Contrast_sensor_KTM Prime_KTM_WN11172P
PHOENIX CONTACT_POWER SUPPLY_QUINTPOWER_2904610
Omron_Connection Sockets_P3G-08
Mitutoyo_Vernier Caliper_530-501
TB 6 I - Feed-through terminal block- 3000486 -Phoenix Contact
SICK_sensor_Photoelectric_sensor_V12-2_VT12T-2P112
Select your currency