SIMATIC ET 200S – Digital Output Electronic Modules – Siemens I/O Modules

USD $ 46.20 – USD $ 501.27

SKU: N/A

Siemens Digital Electronic Modules SIMATIC ET 200S Product Specifications:

Article number 6ES7132-4BB01-0AB0 6ES7132-4BB01-0AA0 6ES7132-4BB31-0AB0 6ES7132-4BB31-0AA0 6ES7132-4BD00-0AB0 6ES7132-4BD02-0AA0
ET200S, El-Mod., 2DO HF,DC24V, 0.5A, 5PC ET200S, El-Mod., 2DO ST,DC24V, 0.5A, 5PC ET200S, El-Mod., 2DO HF, DC 24V, 2A, 5PC ET200S, El-Mod., 2DO ST, DC 24V, 2A, 5PC ET200S, El-Mod., 4DO HF,DC24V, 0.5A,5pcs ET200S, El-Mod., 4DO ST,DC24V, 0.5A,5pcs
Supply voltage
Reverse voltage protection Yes; when using the same load voltage as on the power module Yes; when using the same load voltage as on the power module Yes; when using the same load voltage as on the power module Yes; when using the same load voltage as on the power module Yes; when using the same load voltage as on the power module Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC) 24 V; From power module 24 V; From power module 24 V; From power module 24 V; From power module 24 V; From power module 24 V; From power module
● Reverse polarity protection Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through Yes; polarity reversal can lead to the digital outputs being connected through
Input current
from load voltage L+ (without load), max. 5 mA; Per channel 5 mA; Per channel 5 mA; Per channel 5 mA; Per channel 5 mA; Per channel 10 mA; Per channel
from backplane bus 3.3 V DC, max. 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA
Power loss
Power loss, typ. 0.4 W 0.4 W 1.4 W 1.4 W 0.8 W 0.8 W
Address area
Address space per module
● Address space per module, max. 1 byte 1 byte 1 byte 1 byte 1 byte 1 byte
● with packing 2 bit 2 bit 2 bit 2 bit 4 bit 4 bit
Digital outputs
Type of digital output Source output (PNP, current-sourcing) Source output (PNP, current-sourcing) Source output (PNP, current-sourcing) Source output (PNP, current-sourcing) Transistor Source output (PNP, current-sourcing)
Number of digital outputs 2 2 2 2 4 4
Short-circuit protection Yes Yes Yes Yes Yes Yes
● Response threshold, typ. 1.5 A 0.7 to 1.8 A 4 A 2.8 to 7.2 A 0.7 to 1.5 A 1 to 1.5 A
Limitation of inductive shutdown voltage to -55 to -60 V, typ. L+( ) -55 to -60 V, typ. L+( ) -55 to -60 V, typ. L+( ) -55 to -60 V, typ. L+( ) -55 to -60 V, L+( ) L+ (-55 to -60 V)
Controlling a digital input Yes Yes Yes Yes Yes Yes
Switching capacity of the outputs
● on lamp load, max. 2.5 W 5 W 5 W 10 W 5 W 5 W
Load resistance range
● lower limit 48 Ω 48 Ω 12 Ω 12 Ω 48 Ω 48 Ω
● upper limit 3 400 Ω 3 400 Ω 3 400 Ω 3 400 Ω 3 400 Ω 3 400 Ω
Output voltage
● for signal “1”, min. L+ (-1 V) L+ (-1 V) L+ (-1 V) L+ (-1 V) L+ (-1 V) L+ (-1 V)
Output current
● for signal “1” rated value 0.5 A 0.5 A 2 A 2 A 0.5 A 0.5 A
● for signal “1” permissible range, min. 7 mA 7 mA 7 mA 7 mA 7 mA 7 mA
● for signal “1” permissible range, max. 600 mA 600 mA 2.4 A 2.4 A 600 mA 600 mA
● for signal “0” residual current, max. 0.3 mA 0.3 mA 0.5 mA 0.5 mA 0.3 mA 0.3 mA
Output delay with resistive load
● “0” to “1”, max. 100 µs 200 µs 100 µs 200 µs 100 µs 50 µs
● “1” to “0”, max. 400 µs 1.3 ms 400 µs 1.3 ms 300 µs 120 µs
Parallel switching of two outputs
● for uprating No No No No No No
● for redundant control of a load Yes; per module Yes; per module Yes; per module Yes; per module Yes; per module Yes; per module
Switching frequency
● with resistive load, max. 100 Hz 100 Hz 100 Hz 100 Hz 100 Hz 800 Hz
● with inductive load, max. 2 Hz 2 Hz 2 Hz; 0,5 H 2 Hz; 0,5 H 2 Hz 2 Hz
● on lamp load, max. 10 Hz 10 Hz 10 Hz 10 Hz 10 Hz 10 Hz
Total current of the outputs
● Current per module, max. 1 A 1 A 4 A 4 A 2 A 2 A
Cable length
● shielded, max. 1 000 m 1 000 m 1 000 m 1 000 m 1 000 m 1 000 m
● unshielded, max. 600 m 600 m 600 m 600 m 600 m 600 m
Interrupts/diagnostics/status information
Diagnostics function Yes No Yes No Yes No
Substitute values connectable Yes; 0/1 Yes; 0/1
Diagnoses
● Diagnostic information readable Yes Yes
● Wire-break Yes; channel by channel Yes; channel by channel
● Short-circuit Yes; channel by channel Yes; channel by channel Yes; Module-wise
Diagnostics indication LED
● Group error SF (red) Yes Yes Yes
● Status indicator digital output (green) Yes Yes Yes Yes Yes; Per channel Yes
Parameter
Remark 3 byte 1 byte 3 byte 1 byte 3 byte 1 byte
Diagnostics wire break Disable / enable Disable / enable
Diagnostics short-circuit Disable / enable Disable / enable
Response to CPU/master STOP Substitute a value/keep last value Substitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channels No No No No No No
● between the channels and backplane bus Yes Yes Yes Yes Yes Yes
Isolation
Isolation tested with 500 V DC 500 V DC 500 V DC 500 V DC 500 V DC 500 V DC
Dimensions
Width 15 mm 15 mm 15 mm 15 mm 15 mm 15 mm
Height 81 mm 81 mm 81 mm 81 mm 81 mm 81 mm
Depth 52 mm 52 mm 52 mm 52 mm 52 mm 52 mm
Weights
Weight, approx. 40 g 40 g 40 g 40 g 40 g 40 g

 

Article number 6ES7132-4BF00-0AB0 6ES7132-4BF00-0AA0 6ES7132-4BF50-0AA0
ET200S, Electr.Module 8DO HF DC24V/0,5A ET200S, Electr. Module 8DO DC24V/0,5A ET200S, 8DO Sink Output DC24V/0,5A
Supply voltage
Reverse voltage protection Yes; when using the same load voltage as on the power module Yes Yes; when using the same correctly polarized load voltage as on the power module
Load voltage L+
● Rated value (DC) 24 V; From power module 24 V 24 V; From power module
● Reverse polarity protection Yes; polarity reversal can lead to the digital outputs being connected through Yes Yes
Input current
from load voltage L+ (without load), max. 5 mA; Per channel 5 mA; Per channel 5 mA
from backplane bus 3.3 V DC, max. 10 mA 10 mA 10 mA
Power loss
Power loss, typ. 1.5 W 1.5 W 1.5 W
Address area
Address space per module
● Address space per module, max. 1 byte 1 byte 1 byte
Digital outputs
Type of digital output Source output (PNP, current-sourcing) Source output (PNP, current-sourcing) Transistor
Number of digital outputs 8 8 8
Short-circuit protection Yes Yes Yes
● Response threshold, typ. 0.7 to 1.9 A 1.5 A 1.5 A
Limitation of inductive shutdown voltage to L+ -(47 to 60 V) Typ. L+ (-55 to -60 V) Typ. 47 V
Controlling a digital input Yes Yes Yes
Switching capacity of the outputs
● on lamp load, max. 5 W 5 W 5 W
Load resistance range
● lower limit 48 Ω 48 Ω 48 Ω
● upper limit 3 400 Ω 3 400 Ω 3 400 Ω
Output voltage
● for signal “1”, min. L+ (-1.0 V) L+ (-1.0 V) Max. 1 V
Output current
● for signal “1” rated value 0.5 A 0.5 A 0.5 A
● for signal “1” permissible range, min. 7 mA 7 mA 5 mA
● for signal “1” permissible range, max. 600 mA 600 mA 600 mA
● for signal “0” residual current, max. 0.3 mA 0.3 mA 5 µA
Output delay with resistive load
● “0” to “1”, max. 300 µs 300 µs 300 µs
● “1” to “0”, max. 600 µs 600 µs 600 µs
Parallel switching of two outputs
● for uprating No No No
● for redundant control of a load Yes; per module Yes Yes; per module
Switching frequency
● with resistive load, max. 100 Hz 100 Hz 100 Hz
● with inductive load, max. 2 Hz 2 Hz 0.5 Hz
● on lamp load, max. 10 Hz 10 Hz 10 Hz
Total current of the outputs
● Current per module, max. 4 A 4 A 4 A
Cable length
● shielded, max. 1 000 m 1 000 m 1 000 m
● unshielded, max. 600 m 600 m 600 m
Interrupts/diagnostics/status information
Diagnostics function Yes No No
Diagnoses
● Diagnostic information readable Yes
● Short-circuit Yes; Module-wise
Diagnostics indication LED
● Group error SF (red) Yes
● Status indicator digital output (green) Yes; Per channel Yes Yes
Parameter
Remark 1 byte 3-byte parameter (not accessible for the user) 3 byte
Potential separation
Potential separation digital outputs
● between the channels No No No
● between the channels and backplane bus Yes Yes Yes
Isolation
Isolation tested with 500 V DC 500 V DC 500 V DC
Dimensions
Width 15 mm 15 mm 15 mm
Height 81 mm 81 mm 81 mm
Depth 52 mm 52 mm 52 mm
Weights
Weight, approx. 40 g 40 g 40 g

 

Article number 6ES7132-4BD30-0AB0 6ES7132-4BD32-0AA0 6ES7132-4FB01-0AB0 6ES7132-4HB01-0AB0 6ES7132-4HB13-0AB0
ET200S, El-Mod., 4DO HF, DC24V, 2A, 5pcs ET200S, El-Mod., 4DO ST, DC24V, 2A, 5pcs ET200S, Elect. Mod., 2DO, AC 230V, 5pcs ET200S, El-Mod., 2RO. DC24VAC230V,5A,5PC ET200S, El-Mod., 2RO,DC48V/AC230V,5A,5PC
Supply voltage
Reverse voltage protection Yes; when using the same load voltage as on the power module Yes; when using the same load voltage as on the power module Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC) 24 V; From power module 24 V; From power module 24 V; From power module 24 V; From power module
● Reverse polarity protection Yes; polarity reversal can lead to the digital outputs being connected through Yes Yes Yes
Load voltage L1
● permissible range, lower limit (AC) 24 V; From power module
● permissible range, upper limit (AC) 230 V
● permissible frequency range, lower limit 47 Hz
● permissible frequency range, upper limit 63 Hz
Input current
from load voltage L+ (without load), max. 5 mA; Per channel 10 mA; Per channel 30 mA 30 mA
from load voltage L1 (without load), max. 15 mA; Per channel
from backplane bus 3.3 V DC, max. 10 mA 10 mA 18 mA 10 mA 10 mA
Power loss
Power loss, typ. 1.6 W 1.6 W 0.6 W 0.6 W
Power loss, max. 4 W
Address area
Address space per module
● Address space per module, max. 1 byte 1 byte 1 byte 1 byte 1 byte
● with packing 4 bit 4 bit 2 bit 2 bit 2 bit
Digital outputs
Type of digital output Transistor Source output (PNP, current-sourcing) Triac Relays Relays
Number of digital outputs 4 4 2 2 2
Short-circuit protection Yes Yes Yes No No; The relay outputs must be fused externally with 6 A. When installing in a hazardous area in accordance with the National Electric Code (NEC), the fuse may only be removed using a suitable tool if the module is not in the hazardous area.
● Response threshold, typ. 5 to 10 A 2.8 to 7.2 A
Limitation of inductive shutdown voltage to L+ -(37 to 41V) Typ. L+ (-55 to -60 V) -55 to -60 V No No
Controlling a digital input Yes Yes Yes; possible Yes Yes
Switching capacity of the outputs
● on lamp load, max. 10 W 100 W
Load resistance range
● lower limit 12 Ω 12 Ω
● upper limit 3 400 Ω 3 400 Ω
Output voltage
● for signal “1”, min. L+ (-1.0 V) L+ (-1.0 V) L+ (-1.5 V)
Output current
● for signal “1” rated value 2 A 2 A 2 A 5 A 5 A; See data in manual
● for signal “1” permissible range, min. 7 mA 7 mA 0.1 mA
● for signal “1” permissible range, max. 2.4 A 2.4 A 2.2 A
● for signal “1” minimum load current 8 mA 8 mA
● for signal “0” residual current, max. 0.5 mA 0.1 mA 3 mA
Output delay with resistive load
● “0” to “1”, max. 250 µs 50 µs; Typ. 45 µs 15 ms
● “1” to “0”, max. 400 µs 120 µs; Typ. 90 µs 15 ms
Parallel switching of two outputs
● for uprating No No No
● for redundant control of a load Yes; per module Yes; per module Yes; per module
Switching frequency
● with resistive load, max. 100 Hz 1 000 Hz 10 Hz 2 Hz 2 Hz
● with inductive load, max. 2 Hz 2 Hz; At 0.5 H 0.5 Hz 0.5 Hz 0.5 Hz
● on lamp load, max. 10 Hz 10 Hz 1 Hz 2 Hz 2 Hz
Total current of the outputs
● Current per module, max. 4 A 4 A 2 A; note derating data in the manual
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max. 5 A; per channel
— up to 60 °C, max. 4 A; per channel
vertical installation
— up to 40 °C, max. 5 A; per channel
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max. 5 A 5 A; See data in manual
Cable length
● shielded, max. 1 000 m 1 000 m 1 000 m 1 000 m 1 000 m
● unshielded, max. 600 m 600 m 600 m 600 m 600 m
Interrupts/diagnostics/status information
Diagnostics function Yes No No No No
Substitute values connectable Yes; 0/1 Yes; 0/1
Diagnoses
● Short-circuit Yes; Module-wise
Diagnostics indication LED
● Group error SF (red) Yes; SF-LED (red)
● Status indicator digital output (green) Yes; Per channel Yes Yes Yes Yes
Parameter
Remark 1 byte 3 byte
Response to CPU/master STOP Substitute a value/keep last value, 0/1 Substitute a value/keep last value Substitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channels No No No Yes Yes
● between the channels and backplane bus Yes Yes Yes Yes Yes
● Between the channels and load voltage L+ Yes Yes
Isolation
Isolation tested with 500 V DC 500 V DC 2 500 V DC
Ambient conditions
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressure-altitude Tmin … Tmax at 1 080 hPa … 795 hPa (-1 000 m … +2 000 m) // Tmin … (Tmax – 10 K) at 795 hPa … 658 hPa (+2 000 m … +3 500 m) // Tmin … (Tmax – 20 K) at 658 hPa … 540 hPa (+3 500 m … +5 000 m) Up to max. 2 000 m
Dimensions
Width 15 mm 15 mm 15 mm 15 mm 15 mm
Height 81 mm 81 mm 81 mm 81 mm 81 mm
Depth 52 mm 52 mm 52 mm 52 mm 52 mm
Weights
Weight, approx. 40 g 40 g 37 g 50 g 50 g
Weight N/A
Dimensions N/A

Related products