1. Mechanically Triggered Pneumatic Sequence Signal
A machine slide reaches a defined point and contacts a swivel-lever mechanism to produce a pneumatic sequence signal. The valve's direct mechanical actuation and normally closed 3/2-way function convert that movement into air-path switching. Its 14.5 N actuating-force specification gives the designer a concrete requirement for the contacting mechanism, while M5 connections link the signal to the pneumatic circuit.
Problem Solved
Mechanical contact generates a pneumatic sequence command directly, with a specified lever-actuation force and monostable valve function defining the input requirement and switching behaviour.
Mechanical actuation
14.5 N
3/2-way NC
2. Lever-Commanded Single-Acting Fixture Circuit
A fixture operates a small single-acting pneumatic load from a mechanical linkage rather than a solenoid command. The 3/2-way valve provides the supply-and-exhaust switching arrangement through its M5 working connections. Direct piston-seat operation and an 80 l/min standard nominal flow rating provide documented valve characteristics for selecting the associated tubing and pneumatic load.
Problem Solved
A mechanical linkage can command the fixture's supply and exhaust states directly, avoiding the need for electrical actuation at this point in the pneumatic circuit.
Direct operation
80 l/min nominal
M5
3. Mechanical Switching in a Vacuum Circuit
A vacuum-handling mechanism requires a valve command tied to physical machine movement. The valve's documented working range extends to −0.95 bar, and its direct mechanical operation does not depend on a positive-pressure pneumatic pilot. Through-hole mounting positions the valve beside the contacting mechanism, while the 3/2-way arrangement provides the required vacuum-circuit switching paths.
Problem Solved
Direct mechanical operation supplies a switching command at sub-atmospheric working pressure, connecting vacuum-circuit state changes to machine movement without requiring a separate positive-pressure pilot supply.
Down to −0.95 bar
Direct actuation
Through-hole mounting