Sale!

Festo 153110 R1/4 to 8 mm T-shaped Push-in Fitting

Original price was: USD 9.62.Current price is: USD 9.10.

T-shaped push-in fitting with male R1/4 thread, 8 mm tube connection, 6.7 mm nominal bore, SW14 hex and 25 g PBT housing assembly.

SKU Festo-153110 Category
Festo Pneumatic Fittings

Festo QST-1/4-8 Push-in T-Fitting

BrandFesto
Model IdentifierQST-1/4-8
Official Part Number153110

Technical Overview

The Festo QST-1/4-8 is a T-shaped push-in fitting with one male R1/4 supply connection and two outlets for 8 mm outside-diameter tubing. Its 25 g PBT assembly has a nickel-plated brass stud, 6.7 mm nominal size, 18.1 mm insertion depth and SW14 installation hex.

T-shaped R1/4 male to 8 mm tube push-in fitting with coated thread seal, SW14 hex and 25 g product weight.

Key Features

  • T-shaped push-pull fitting design
  • Male R1/4 threaded connection
  • 8 mm outside-diameter tubing connection
  • 6.7 mm nominal size and 18.1 mm tube insertion depth
  • Coated screw-in thread seal and SW14 external hex
  • −0.95 to 6 bar across the full temperature range; up to 14 bar depending on temperature
  • Water limited to 6 bar at maximum 50 °C; liquid, ice-free medium required
  • PBT housing and nickel-plated brass screwed plug, POM release ring, NBR tube seal and stainless steel clamp
  • 25 g product weight; Class 4 cleanroom suitability and −10 to 80 °C ambient range
  • One supply line and two outlets; pack size 10

Branch an R1/4 connection into two 8 mm tubing outlets with a 25 g T-shaped push-in fitting.

Technical Specification Matrix

ParameterValue
SizeStandard
Nominal size6.7 mm
Tubing insertion depth18.1 mm
Type of seal on screwed plugCoating
Mounting positionAny
DesignT-shape; Push-pull principle
Size of pack10
Operating pressure complete temperature range-0.095 MPa...0.6 MPa; -0.95 bar...6 bar; -13.775 psi...87 psi
Temperature-dependent operating pressure-0.095 MPa...1.4 MPa; -0.95 bar...14 bar; -13.775 psi...203 psi
Note on operating pressureWater: max. 0.6 MPa at max. 50°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free)
Note on operating and pilot mediumLubricated operation possible
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Ambient temperature-10 °C...80 °C
Physical Weight (kg)0.025
Number of outputs2
Number of supply lines1
Type of mountingExternal hex SW14
Pneumatic connection, port 1Male thread R1/4
Pneumatic connection, port 2For tubing outside diameter of 8 mm
Colour of release ringBlue
Material screwed plugNickel-plated brass
Note on materialsRoHS compliant
Material housingPBT
Material release ringPOM
Material tubing sealNBR
Material tubing clamp componentHigh-alloy stainless steel
Select your currency