Panasonic AFPXHC40T FP-XH 40-I/O NPN PLC

USD 343.78

Panasonic AFPXHC40T FP-XH PLC with 24 DC inputs, 16 NPN outputs, 24k/32k/40k-step program capacity, USB and 100–240 V AC supply.

SKU Panasonic-AFPXHC40T Category
Top Brands > Panasonic > Panasonic Programmable Controller Units

Panasonic AFPXHC40T FP-XH 40-I/O NPN PLC

BrandPanasonic
Model IdentifierFP-XH C40T
Official Part NumberAFPXHC40T

Technical Overview

The Panasonic AFPXHC40T FP-XH C40T is a general-purpose compact PLC with 24 digital inputs and 16 NPN transistor outputs, powered from 100–240 V AC. It offers selectable 24k-, 32k- or 40k-step Flash-ROM program capacity, with basic-instruction processing from 0.04 µs per step within the first 5k steps and a USB programming port. Four built-in pulse-output channels support up to 100 kHz, while compatible expansion units and application or communication cassettes extend the system according to the selected configuration. The manufacturer specifies operation from 0 to +55 °C in an environment without corrosive gas or excessive dust.

40-I/O FP-XH PLC with 24 DC inputs, 16 NPN outputs, selectable program capacity, four pulse-output channels, USB and AC power.

Key Features

  • 40 built-in digital I/O points: 24 inputs and 16 NPN transistor outputs
  • 100–240 V AC power supply for the C40T variant
  • Selectable 24k/32k/40k-step program capacity; 32k-step default configuration
  • Built-in Flash-ROM retains the program without a backup battery
  • Basic instructions from 0.04 µs per step within the first 5k program steps
  • Four built-in pulse-output channels with up to 100 kHz output capability
  • NPN open-collector outputs rated 0.5 A per point for 5–24 V DC loads
  • USB programming and support for compatible expansion and communication options
  • Active AFPXHC40T ordering entry in Panasonic's current FP-XH catalog

Control 40 built-in digital I/O points with four pulse-output channels up to 100 kHz.

Technical Specification Matrix

ParameterValue
Product type / familyFP-XH C40T general-purpose programmable controller control unit
Built-in digital inputs24 points; 24 V DC; bidirectional sink/source inputs
Built-in digital outputs16 NPN transistor outputs
Output method / isolationNPN open collector; optocoupler isolation
Output load rating5–24 V DC nominal; 4.75–26.4 V DC permissible; maximum 0.5 A per point; common and installation limits apply
Output common arrangement8 points per common for C40
Output off-state leakage / on-state drop1 µA maximum leakage; 0.3 V DC maximum on-state voltage drop
Program / control methodLadder programming; cyclic operation
Program memoryBuilt-in Flash-ROM; 24k/32k/40k steps selectable; 32k default
Data-register capacity64k/32k/12k words depending on selected program capacity
Basic-instruction speedFrom 0.04 µs/step within the first 5k steps; from 0.7 µs/step beyond 5k steps
High-level instruction speedFrom 0.22 µs/step within the first 5k steps; from 1.73 µs/step beyond 5k steps
Pulse / PWM output4 built-in pulse channels, 100 kHz maximum; 4 PWM channels; availability and limits depend on configuration
High-speed countersSingle phase: 8 channels (100 kHz × 4 and 10 kHz × 4); two phase: 4 channels (50 kHz × 2 and 10 kHz × 2)
Programming interfaceUSB port; Control FPWIN GR7 / Control FPWIN Pro7 software
Expansion / communicationsCompatible FP-X/FP-X0 expansion units and FP-XH application/communication cassettes; options are separate and configuration limits apply
Power supply100–240 V AC
Input current320 mA maximum at 100 V AC; 195 mA maximum at 200 V AC
Power consumptionA real-power wattage is not specified in the cited catalog; input-current ratings are listed separately
Operating temperature0 to +55 °C
Storage temperature−40 to +70 °C
Relative humidity10–95% RH at 25 °C for operation and storage; no condensation
Operating environmentNo corrosive gases or excessive dust; pollution degree 2; overvoltage category II
I/O connectionTerminal blocks; connector pin counts are not specified in the cited ordering entry
IP rating / housing materialNot specified in the cited manufacturer catalog
Physical Weight (kg)0.545
Dimensions L x W x H (cm)15.0 x 8.2 x 9.0
Dimension and weight basisApproximate unit weight; body width × depth × height from the manufacturer's 150 × 82 × 90 mm drawing; mounting projection excluded
Lifecycle statusActive — current FP-XH ordering table lists AFPXHC40T

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Machine sequencing with distributed field devices

A machine needs to read multiple 24 V DC switches or sensors and operate compatible DC control loads from a central controller.

Potential use

Use the 24 inputs and 16 NPN outputs for sequence logic, with compatible expansion where required. Verify sink/source wiring, load current, common-current restrictions and the complete machine control design.

40 digital I/O 24 inputs 16 NPN outputs USB programming

2. Multi-channel pulse-command machinery

A winding, indexing or transfer machine uses compatible pulse-input drives and requires coordinated sequence logic with pulse commands.

Potential use

The four built-in pulse-output channels can support appropriate command interfaces up to the listed frequency. Confirm supported motion instructions, simultaneous-channel limits, pulse format and driver electrical requirements before integration.

4 pulse channels 100 kHz maximum High-speed counters 24k/32k/40k steps
Select your currency