Omron E3ZG-LS61-LO NPN Light-ON TOF Sensor

USD 40.41

Omron E3ZG-LS61-LO is an NPN Light-ON TOF photoelectric sensor with a 50–900 mm sensing range, 2 m cable and IP65 protection.

SKU Omron-E3ZG-LS61-LO Category
Top Brands > Omron > Omron Photoelectric Sensors

Omron E3ZG-LS61-LO Time-of-Flight Photoelectric Sensor

BrandOmron
Model IdentifierE3ZG-LS61-LO
Official Part NumberE3ZG-LS61-LO

Technical Overview

The Omron E3ZG-LS61-LO is a distance-setting time-of-flight photoelectric sensor listed by Omron with an NPN Light-ON output and 50–900 mm sensing range. The catalog lists the exact model in a 2 m pre-wired configuration and specifies IP65 for the E3ZG-LS sensor body. Current supply status is not established by the consulted manufacturer catalog and is recorded as Unknown.

A 50–900 mm NPN Light-ON time-of-flight sensor with 2 m cable and IP65 sensor-body protection.

Key Features

  • Exact Omron model E3ZG-LS61-LO, listed with 2 m cable
  • Time-of-flight distance-setting photoelectric sensing
  • 50–900 mm range (white target, catalog specification)
  • NPN output with Light-ON operation
  • Pre-wired 2 m cable configuration
  • IP65 sensor body (catalog family specification)
  • Current supply status is not established; recorded as Unknown
  • Exact-model weight and operating temperature were not stated in the consulted catalog

Set distance-based detection across the catalogued 50–900 mm range.

Technical Specification Matrix

ParameterValue
Sensor typeDistance-setting time-of-flight photoelectric sensor
Sensing distance50–900 mm (white target)
OutputNPN; Light-ON
ConnectionPre-wired cable, 2 m configuration
ProtectionIP65 sensor body (E3ZG-LS family)
Light sourceNot stated for this exact non-teaching model in the consulted catalog
Operating temperatureNot stated in the consulted exact-model catalog
Physical Weight (kg)Not stated in the consulted exact-model manufacturer catalog
Dimensions L x W x H (cm)Not stated for this exact non-teaching model in the consulted catalog
Supply statusUnknown; current manufacturer lifecycle state not established

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Conveyor package detection

Packages can vary in height and may pass at different positions along a conveyor.

Potential use

The catalogued time-of-flight range can be evaluated for presence detection after validating target material, position and mounting geometry.

50–900 mm TOF NPN Light-ON

2. Workpiece position monitoring

A machine station may require a discrete signal when an item reaches a selected sensing region.

Potential use

The NPN Light-ON output can interface with compatible control logic when the target and installation conditions are confirmed.

2 m cable IP65 Distance setting Unknown supply
Select your currency