Loctite 510 , 515 ,518, 5188

USD $ 16.80 – USD $ 128.52

Loctite 510 : Gasketing Product- high temperature and chemical resistance. Ideal for use on rigid flanges.
Loctite 515 : Gasketing product for machined metal flanges. Medium strength. For gaps up to 0.25 mm. 30 min fixture time.
Loctite 518 : Medium-strength, general purpose gasketing product – excellent contamination tolerance. Ideal for use on casted iron, steel and aluminum flanges
Loctite 5188: Gasketing Product – excellent oil and chemical resistance. General purpose. Highly flexible.

SKU: N/A

Loctite is an brand of adhesives, sealants, surface treatments, and other industrial chemicals that include acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies.

Features and Benefits

Loctite 510
LOCTITE® 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and motor casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.

  • For metal flanges
  • High temperature resistant flange gasket
  • Adapts to flange surface irregularities and scratches up to 0.25 mm
  • Increases the torque capacity of assembled flanges

Volume : 50ml/300ml
Loctite 515
LOCTITE® 515 is a medium strength (6 N/mm² tensile shear strength), medium cure speed, methacrylate-based industrial gasketing product designed for machined, rigid metal flanges. The product, which cures anaerobically, is suitable for gaps up to 0.25 mm. It is used typically as a form-in-place product for pumps, thermostats, compressors, transmission housings and axle covers.

  • Ideal for machined metal components
  • Perfect seal between components
  • For gaps up to 0.25 mm

Volume : 50ml/300ml
Loctite 518
LOCTITE® 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.

  • Semi-flexible, medium-strength anaerobic flange gasket
  • Easy to automate
  • Reduces process costs – eliminates manual assembly of conventional gaskets
  • NSF P1 Reg. No. 123758
  • For active and inactive rigid metal flanges
  • Cures through minor surface contamination
  • Adapts to flange surface irregularities and gaps up to 0.25 mm
  • Gel-type consistency
  • Seals instantly against low pressure
  • Reduces inventory costs – no need for large inventory of cut gaskets
  • Resists high pressure when fully cured
  • No compression set or misaligned gaskets

Volume : 50ml/300ml
Loctite 5188
LOCTITE® 5188 is a highly flexible sealant which cures when confined in the absence of air between close-fitting metal surfaces. It is designed for use on rigid metal flanged connections, particularly where minor oil contamination of the flange surfaces can occur. The product is particularly suitable for use on aluminum substrates where very good adhesion is needed. It ensures an instant, low-pressure seal. For sealing rigid flange faces on transmissions and motor casings.
  • Ideal for sealing all kinds of rigid metal flanges, especially aluminum flanges
  • Superior adhesion, can tolerate slight oil contamination on the flange surface
  • Excellent chemical resistance, highly flexible
  • Excellent in demanding applications

Volume: 50ml, 300ml

Related products