Contact Us:
sales@inosaki.com

KTM-WN11172P Contrast Sensors – SICK Sensor

$ 236.44

SKU SICK 1082137 Category

SICK sensor one of the world’s leading producers of sensors and sensor solutions for industrial applications. SICK is a technology and market leader in Factory and Logistics Automation as well as Process Automation. The sensor range are: Laser Sensors, Cylinder Sensors, Photoelectric Sensors, Fork Sensors, Encoders, Color Sensors, Distance Sensor, Contrast Sensor, Color Sensor, Inductive Proximity Sensors, Fiber Optic Sensor with our signature range sick sensor intelligence.

Part Number: 1082137
Contrast Sensor Model: KTM-WN11172P
OEM Spec Ref 

Features

Dimensions (W x H x D) 12 mm x 31.5 mm x 21 mm
Sensing distance 12.5 mm
Sensing distance tolerance ± 3 mm
Housing design (light emission) Small
Light source LED, RGB 1)
Wave length 470 nm, 525 nm, 625 nm
Light emission Long side of housing
Light spot size 1.5 mm x 6.5 mm
Light spot direction Vertical 2)
Receiving filters None
Adjustment Teach-in button
Teach-in mode 2-point teach-in static/dynamic + proximity to mark

ET: Teach-in static

  • 1) Average service life: 100,000 h at TU = +25 °C.
  • 2) In relation to long side of housing.

 

Mechanics/electronics

Supply voltage 12 V DC … 24 V DC 1)
Ripple ≤ 5 Vpp 2)
Current consumption < 50 mA 3)
Switching frequency 15 kHz 4)
Response time 32 µs 5)
Jitter 15 µs
Switching output NPN
Switching output (voltage) NPN: HIGH = approx. U/ LOW ≤ 2 V
Switching mode Light/dark switching
Output current Imax. 50 mA 6)
Input, static teach-in (ET) NPN: Teach: U < 2 V

NPN: Run: UV – 2 V or open

Retention time (ET) 28 ms, non-volatile memory
Time delay None
Connection type Cable with M12 male connector, 4-pin, 0.2 m
Protection class III
Circuit protection UV connections, reverse polarity protected

Output Q short-circuit protected

Interference pulse suppression

Enclosure rating IP67
Weight 20 g
Housing material Plastic, ABS
Optics material Plastic, PMMA
Indication LED indicator green: power on

LED indicator, yellow: Status switching output Q

  • 1) Limit values: DC 12 V (–10 %) … DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
  • 2) May not exceed or fall below Uv tolerances.
  • 3) Without load.
  • 4) With light/dark ratio 1:1.
  • 5) Signal transit time with resistive load.
  • 6) Total current of all Outputs.

Additional information

Related Products

IDS_Camera_uEye_XC_Starter Set_1
Omron_Connection Sockets_P2CF-08-E
Omrom_Basic_Unit_G9SX-BC202-RC
Siemens S7 power supply
ER-VAS
MOXA_General Device Servers_MOXA Nport 5232
Select your currency