EasyPact D3N – LC1E – 3 Poles (3NO) Contactor, 120A – Schneider Contactors & Reversing Contactors
$ 292.10
SKU: LC1E120M5N
Specifications
Main | |
Part Number | LC1E120M5N |
Product Series | Compact |
product type | Contactor |
product short name | LC1E |
Application field of contactor | Applied to AC loads with power factor greater than or equal to 0.95 |
Applied to non-inductive or slightly inductive loads, resistance furnaces | |
use category | AC-3AC |
-1 | |
number of poles | 3P |
Rated working voltage [Ue] | Power circuit: <= 690 V AC 50/60 Hz |
Rated operating current [Ie] | 120 A 55 °C) at <= 440 V AC AC-3 for power circuits |
150 A 40 °C) at <= 440 V AC AC-1 for power circuits | |
[Uc] control circuit voltage | 230V AC 50Hz |
Additional information | |
Motor power (kW) | 37 kW at 220/230 V AC 50/60 Hz (AC-3) |
55 kW at 380/400 V AC 50/60 Hz (AC-3) | |
59 kW at 415/440 V AC 50/ 60 Hz (AC-3) | |
75 kW at 500 V AC 50/60 Hz (AC-3) | |
80 kW at 660/690 V AC 50/60 Hz (AC-3) | |
Loop contact type | 3 NO |
Conventional thermal current [Ith] | 150 A at <40 °C for power circuits |
Rated making capacity [Irms] | 140 A AC for auxiliary contacts according to IEC 60947-5-1 |
1200 A at 440 V AC for power circuits according to IEC 60947-4-1 | |
Rated breaking capacity | 960 A at 440 V for power circuits conforming to IEC 60947 |
Rated short-time withstand current [Icw] | 1100 A at <40 °C – 10 s for power circuits |
Fuses for use with relays | 250 A gG at <= 690 V for type 1 suitable control circuits conforming to IEC 60947-5-1 |
10 A gG at <= 690 V for type 1 suitable power circuits | |
average impedance | 0.6 mΩ – Ith 150 A 50 Hz for power circuits |
power consumption per pole | 8.6W AC-3 |
14W AC-1 | |
Rated insulation voltage [Ui] | 690 V conforming to IEC 60947-4-1 |
Overvoltage category | III |
pollution level | 3 |
Rated impulse withstand voltage [Uimp] | 8 kV coil not connected to power circuit conforming to IEC 60947 |
Mechanical life | 400000 times |
Electrical life | 800,000 AC-3 |
250,000 AC-1 | |
Control loop characteristics | AC at 50 Hz standard |
Control voltage limit | 0.85…1.1 Uc 55 °C run 50 Hz |
0.35…0.55 Uc 55 °C release 50 Hz | |
(~50Hz pickup) power consumption (VA) | 300VA 50Hz (0.820°C) |
(~50Hz hold) power consumption (VA) | 22VA 50Hz 0.3 20°C) |
heat dissipation | 3…8 W for control circuits |
action time | 20…50 ms off |
6…20 ms on opening | |
operating frequency | 1200 cycles/h at <55 °C |
Wiring capacity | Control circuit: screw-on2 1…2.5 mm² Cable option: flexible cord with cable terminals |
Power circuit: screw-on1 10…120 mm² Cable option: flexible cable with cable terminal | |
Power circuit: screw-on2 20 …170 mm² Cable option: flexible with wire terminals Power | |
circuit: screw tight1 10…120 mm² Cable option: solid without wire terminals Power | |
circuit: screw tight2 20…170 mm² Cable option: Rigid wire without wire terminal | |
Control circuit: Bolt fastening1 1…2.5 mm² Cable selection: Flexible wire without wire terminal | |
Control circuit: Bolt fastening2 1…2.5 mm² Cable selection: Flexible wire without wire Terminals | |
Control circuit: Bolt fastening1 1…2.5 mm² Cable selection: Flexible wire with wire terminal | |
Control circuit: Bolt fastening1 1…2.5 mm² Cable selection: Hard wire without wire terminal | |
Control circuit: Bolt fastening 2 1…2.5 mm² Cable option: solid without cable terminals | |
Tightening torque | Control circuit: 1.2 Nm |
Power circuit: 12 Nm | |
Auxiliary contact type | 1 NO + 1 NC |
Minimum switching voltage | 17 V for control circuits |
Minimum switching current [Imin] | 5 mA for control loop |
Insulation resistance | > 10 MΩ for control loops |
non-overlapping time | 1.5 ms power-on to ensure NC and NO contact |
1.5 ms power-off to ensure NC and NO contact | |
installation method | DIN rail mount |
chassis mount | |
environment | |
standard | GB 14048.4 |
IEC 60947-4-1 | |
certified product | CCC |
IP protection class | IP20 conforming to IEC 60529 |
Protective measures | TH (pollution degree 3) conforming to IEC 60068 |
ambient air temperature | -20…70 °C (allowed at Uc) |
5…55 °C operation | |
-60…80 °C storage | |
working altitude | 3000 m None |
Fire resistance and abnormal high temperature resistance | 850 °C conforming to IEC 60695-2-1 |
Shock and vibration resistance | Shock resistance with contacts open (1.5 gn (5…300 Hz)) |
shock resistance with contacts closed (3 gn (5…300 Hz)) | |
shock resistance with contacts open (6 gn (11ms)) | |
shock resistance Performance Contact closed state (7 gn (11ms)) | |
high | 158 mm |
width | 120 mm |
depth | 132 mm |
Product Weight | 2.3 kg |
packaging unit | |
Unit Type of Package 1 | PCE |
Number of Units in Package 1 | 1 |
Package 1 Height | 17.074 cm |
Package 1 Width | 17.851 cm |
Package 1 Length | 20.796 cm |
Package 1 Weight | 2.394 kg |
Unit Type of Package 2 | P06 |
Number of Units in Package 2 | Twenty four |
Package 2 Height | 73cm |
Package 2 Width | 60cm |
Package 2 Length | 80cm |
Package 2 Weight | 71422g |
Package 3 Height | 73cm |
contract warranty | |
Warranty | 18 months |
Weight | 2.3 kg |
---|---|
Dimensions | 13.2 × 12.0 × 15.8 cm |
Related products
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details