CBMC E4 24DC/1-10A NO – 2906032 – Phoenix Contact Electronic Circuit Breaker

USD $ 153.51

SKU: 2906032

Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.

Dimensions

Dimensional drawing
Width 36 mm
Height 90 mm
Depth 98 mm (incl. DIN rail 7.5 mm)

 

Ambient Conditions

Degree of protection IP20
Ambient temperature (operation) -25 °C … 60 °C
Ambient temperature (storage/transport) -40 °C … 70 °C
Altitude ≤ 3000 m up to 52 °C (amsl (above mean sea level))
≤ 4000 m up to 46 °C (amsl (above mean sea level))
Humidity test 96 h, 95 % RH, 40 °C
Shock (operation) 30g (IEC 60068-2-27, Test Ea)
Vibration (operation) 10 Hz … 57.6 Hz (Amplitude ±0.35 mm; in accordance with IEC 60068-2-6, Test Fc)
57.6 Hz … 150 Hz (Acceleration 5g; in accordance with IEC 60068-2-6, Test Fc)

 

Commercial Data

Item number 2906032
Packing unit 1 pc
Minimum order quantity 1 pc
Product Key CLA152
Catalog Page Page 375 (C-4-2019)
GTIN 4055626149356
Weight per Piece (including packing) 140.2 g
Weight per Piece (excluding packing) 133.94 g
Customs tariff number 85362010
Country of origin DE

 

Connection Data

Main circuit IN+
Connection method Push-in connection
Stripping length 15 mm
Conductor cross section rigid 0.2 mm² … 10 mm²
Conductor cross section AWG 24 … 8
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² … 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² … 6 mm²
Main circuit IN-
Connection method Push-in connection
Stripping length 10 mm
Conductor cross section rigid 0.2 mm² … 2.5 mm²
Conductor cross section AWG 24 … 12
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² … 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² … 2.5 mm²
Main circuit OUT
Connection method Push-in connection
Stripping length 10 mm
Conductor cross section rigid 0.2 mm² … 2.5 mm²
Conductor cross section AWG 24 … 12
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² … 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² … 2.5 mm²
Remote indication circuit
Conductor cross section rigid 0.2 mm² … 2.5 mm²
Conductor cross section AWG 24 … 12
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² … 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² … 2.5 mm²

 

Signaling

Channel LED off off (Channel switched off)
Channel LED yellow lit (Channel switched on, channel load > 80% )
flashing (Programming mode active)
Channel LED green lit (Channel switched on)
Channel LED red lit (Channel switched off, over- or undervoltage active)
ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release)
flashing (Channel switched off, ready to be switched back on, overload or short-circuit release)
two flashes (Channel switched off, device total current limit 40 A exceeded)

 

Mounting

Mounting type DIN rail: 35 mm
Weight 0.1402 kg
Dimensions 9.8 × 3.6 × 9 cm