 |
 |
|---|---|
USB 2.0 USB 3.x GigE |
USB 2.0 USB 3.x GigE |
Syntax
INT is_SetSensorTestImage (HIDS hCam, INT TestImage, INT Param)
Description
is_SetSensorTestImage() enables a test image function in the sensor. You can select different test images. The test images supported by a particular camera can be queried using the is_GetSupportedTestImages() function. For some test images, the Param parameter provides additional options. If the test image does not support additional parameters, Param will be ignored.
|
Manually changing the pixel clock will disable the test image mode. |
|
This function is currently not supported by the following camera models: •UI-1007XS |
Input parameters
hCam |
Camera handle |
TestImage |
The test image to be set. See also is_GetSupportedTestImages(). |
Param |
Additional parameter for used to modify the test image. Not available for all test images. |
Return values
IS_BAD_STRUCTURE_SIZE |
An internal structure has an incorrect size. |
IS_CANT_COMMUNICATE_WITH_DRIVER |
Communication with the driver failed because no driver has been loaded. |
IS_CANT_OPEN_DEVICE |
An attempt to initialize or select the camera failed (no camera connected or initialization error). |
IS_CAPTURE_RUNNING |
A capturing operation is in progress and must be terminated first. |
IS_INVALID_BUFFER_SIZE |
The image memory has an inappropriate size to store the image in the desired format. |
IS_INVALID_CAMERA_TYPE |
The camera type defined in the .ini file does not match the current camera model. |
IS_INVALID_CAMERA_HANDLE |
Invalid camera handle |
IS_INVALID_MEMORY_POINTER |
Invalid pointer or invalid memory ID |
IS_INVALID_PARAMETER |
One of the submitted parameters is outside the valid range or is not supported for this sensor or is not available in this mode. |
IS_IO_REQUEST_FAILED |
An IO request from the uEye driver failed. Possibly the versions of the ueye_api.dll (API) and the driver file (ueye_usb.sys or ueye_eth.sys) do not match. |
IS_NO_ACTIVE_IMG_MEM |
No active image memory available. You must set the memory to active using the is_SetImageMem() function or create a sequence using the is_AddToSequence() function. |
IS_NO_SUCCESS |
General error message |
IS_NOT_CALIBRATED |
The camera does not contain any calibration data. |
IS_NOT_SUPPORTED |
The camera model used here does not support this function or setting. |
IS_NULL_POINTER |
Invalid array |
IS_SUCCESS |
Function executed successfully |
IS_TIMED_OUT |
A timeout occurred. An image capturing process could not be terminated within the allowable period. |
IS_TRIGGER_ACTIVATED |
The function cannot be used because the camera is waiting for a trigger signal. |
Related functions
