IDS Software Suite 4.97

Zoom window out
Larger text | Smaller text
Hide page header
Show expanding text
Print topic
Send mail feedback
Copy topic URL

Navigation: D: Specifications > GigE uEye CP Rev. 2 / Rev. 2.2 > Electrical specifications GigE uEye CP Rev. 2 / Rev. 2.2

Trigger input wiring GigE uEye CP Rev. 2 / Rev. 2.2

Scroll Previous Top Next More

Digital input specifications

	Symbol	Min.	Typ.	Max.	Unit
Input high range	VIH	5	-	24	V
Input low range	VIL	0	0	1	V
Input leakage current	II	-	-	-	µA
Trigger pulse width (edge)		10	-	-	µs
Trigger edge steepness		35	-	-	V/ms

For interpreting the trigger signal, either the rising or the falling edge can be used. The digital input is galvanically isolated using an optocoupler to protect the camera and the PC against surges. Only DC voltages may be applied to the digital input.

The signal source of the trigger must be able to carry a load of at least 20 mA.

Digital input wiring

Fig. 572: GigE uEye CP Rev. 2 - Wiring of the trigger connector

Absolute maximum rating

	Symbol	Max.	Unit
Voltage range	VCC	30	V

Please enable JavaScript to view this site.

IDS Software Suite 4.97