Class
uEye.DeviceFeatureAOIMerge.VerticalMerge
Accessible
Camera.Device.Feature.AoiMerge.Vertical.GetDefault
Syntax
uEye.DeviceFeatureAOIMerge.VerticalMerge.GetDefault(out uEye.Defines.VerticalAoiMergeMode mode)
Description
Returns the default AOI merge mode.
Parameter
mode |
uEye.Defines.VerticalAoiMergeMode.Off: AOI merge mode is off. |
uEye.Defines.VerticalAoiMergeMode.FallingGpio1: Sensor is triggered by falling edge on GPIO 1. |
|
uEye.Defines.VerticalAoiMergeMode.FallingGpio2: Sensor is triggered by falling edge on GPIO 2. |
|
uEye.Defines.VerticalAoiMergeMode.RisingGpio1: Sensor is triggered by rising edge on GPIO 1. |
|
uEye.Defines.VerticalAoiMergeMode.RisingGpio2: Sensor is triggered by rising edge on GPIO 2. |
|
uEye.Defines.VerticalAoiMergeMode.Freerun: Sensor is operated with maximum speed. |
|
uEye.Defines.VerticalAoiMergeMode.Software: Sensor is triggered via software. |
