Class
Accessible
Camera.Trigger.Set
Syntax
uEye.Trigger.Set(uEye.Defines.TriggerMode mode)
Description
Sets the trigger mode.
|
The USB uEye XS have no I/O connector. The USB uEye XS does not support a trigger function. |
Parameter
•mode: Mode to be set:
uEye.Defines.TriggerMode.Continuous |
Software trigger |
Call of Capture() (continuous mode) |
uEye.Defines.TriggerMode.Hi_Lo |
Hardware trigger |
Falling signal edge |
uEye.Defines.TriggerMode.Hi_Lo_Pre |
Enables the pre-trigger in the memory mode |
Falling signal edge |
uEye.Defines.TriggerMode.Hi_Lo_Sync |
Freerun sync./hardware trigger (The freerun synchronization mode is currently only supported by the sensors of the UI-146x/UI-546x series.) |
Falling signal edge |
uEye.Defines.TriggerMode.Lo_Hi |
Hardware trigger |
Rising signal edge |
uEye.Defines.TriggerMode.Lo_Hi_Pre |
Enables the pre-trigger in the memory mode |
Rising signal edge |
uEye.Defines.TriggerMode.Lo_Hi_Sync |
Freerun sync./hardware trigger (The freerun synchronization mode is currently only supported by the sensors of the UI-146x/UI-546x series.) |
Rising signal edge |
uEye.Defines.TriggerMode.Off |
Off |
- |
uEye.Defines.TriggerMode.Software |
Software trigger |
Call of Freeze() (single frame mode) |
