The Prescaler class provides methods for setting a trigger prescaler. Via the trigger presacler (frequency divider) you can set for some uEye models that the trigger signal is divided by the set value. This is necessary when the trigger signal delivers more pulses as needed for the captures. With the set value, e.g. 40, you define that the camera captures an image only every 40th trigger signal.
|
The trigger prescaler is currently supported by the following models in hardware trigger mode: •USB 3 uEye CP Rev. 2 •USB 3 uEye CP •USB 3 uEye LE •USB 3 uEye ML •GigE uEye CP Rev. 2 •GigE uEye CP •GigE uEye FA •GigE uEye SE Rev. 4 |
The following classes exist:
