Class
Accessible
Camera.Device.Feature.Timestamp.Set
Syntax
uEye.DeviceFeatureTimestamp.Set(uEye.Types.TimestampConfiguration timestampConfiguration)
uEye.DeviceFeatureTimestamp.Set(uEye.Defines.TimestampMode mode, uEye.Defines.IO.Pin pin, uEye.Defines.IO.Edge edge)
Description
Sets the time stamp configuration.
Parameter
timestampConfiguration |
|
mode |
Mode for the time stamp configuration: •uEye.Defines.TimestampMode.Once: Resets once the time stamp of the camera to 0. |
pin |
Pin which is used for time stamp event: •uEye.Defines.IO.Pin.None: No time stamp event. •uEye.Defines.IO.Pin.Trigger: A signal on the trigger pin fires the time stamp event. •uEye.Defines.IO.Pin.Gpio0: A signal on the GPIO 1 fires the time stamp event. •uEye.Defines.IO.Pin.Gpio1: A signal on the GPIO 2 fires the time stamp event. |
edge |
Signal on the rising/falling edge which is used for time stamp event (when uEye.Defines.IO.Pin.Trigger is used): •uEye.Defines.IO.Edge.Falling: The falling edge signal fires the time stamp event. •uEye.Defines.IO.Edge.Rising: The rising edge signal fires the time stamp event. |
