Class
Accessible
Camera.Timeout.Set
Syntax
uEye.Timeout.Set(uEye.Defines.TimeoutMode timeout, uint u32Timeout)
Description
Sets the user-defined timeout values of the uEye API. If no user-defined timeout is set, the default value of the uEye API is used for the relevant timeout.
|
The user-defined timeout only applies to the specified camera at runtime of the program. |
Parameter
timeout |
Timeout value to be set •uEye.Defines.TimeoutMode.Trigger: Sets the timeout value for triggered image capture |
u32Timeout |
Timeout value in 10 ms. Value range [0; 4...429496729] (corresponds to 40 ms to approx. 1193 hours) 0 = use default value of the uEye API For 1...3, the value 4 is used. |
