Class
Accessible
Camera.Size.AOI.Sequences.SetEnable
Syntax
uEye.SizeAOISequence.SetEnable(uEye.Defines.AOISequenceMode mode)
Description
Set a bitmask defining which AOIs should be active (only UI-124x/UI-324x/UI-524x and UI-125x/UI-325x/UI-525x camera models).
|
Note: SetParams() must be called after SetEnable(), with enabling the sequence AOI mode all AOIs are set to the same value and therefore the parameters are lost. |
Parameter
•mode: Bitmask with the defined AOIs
