Class
Accessible
Camera.Timing.PixelClock.Set
Syntax
uEye.TimingPixelClock.Set(int s32Value)
Description
Sets the frequency used to read out image data from the sensor (pixel clock frequency). Due to an excessive pixel clock for USB cameras, images may get lost during the transfer. If you change the pixel clock on-the-fly, the current image capturing process will be aborted.
|
Some sensors allow a higher pixel clock setting if binning or subsampling has been activated. If you set a higher pixel clock and then reduce the binning/subsampling factors again, the driver will automatically select the highest possible pixel clock for the new settings. |
Parameter
•s32Value: Value to be set for the pixel clock in MHz.
