The RepeatedStartConditionsI2C class provides methods for configuring the I2C stop bit between the write and read command.
|
I2C functions are only supported by the following PCB versions: •uEye LE USB 3.1 Gen 1 •USB 3 uEye LE •USB uEye LE •GigE uEye LE |
Methods
Method |
Description |
|---|---|
Returns the default setting for the I2C stop bit. |
|
Returns the current setting for the I2C stop bit. |
|
Returns if setting the I2C stop bitfor the read command is supported. |
|
Enables/disables the I2C stop bit between the write and read command. |
