The MemoryMode class provides methods for configuring special camera functions provided by specific uEye models:
•On USB 3 uEye CP Rev. 2 models: Enable or disable the internal image memory of the camera. By default, the camera is operated without image memory. Note that this class uses the camera object while the MemoryMode class provided by uEye.Configuration uses the device ID.
|
Hint: To enable or disable the internal image memory, you must use the MemoryMode class provided by uEye.Configuration. |
Methods
Method |
Description |
|---|---|
Returns if the internal image memory of the camera is enabled. |
|
Returns the default setting of the internal image memory. |
|
Returns if the internal image memory is supported. |
